Planar TR 1300/1 vector network analyser
09 May, 2012The Planar TR 1300/1 vector network analyser is a two-part, one-path device operating between 0.3 and 1300 MHz. Measured parameters are S11, S22 magnitude and phase.
Planar 804/1 vector network analyser
09 May, 2012Measured parameters of the Planar 804/1 vector network analyser are S11, S22, S12 and S22 magnitude and phase.
Planar 304/1 vector network analyser
09 May, 2012The Planar 304/1 vector network analyser’s capabilities include embedding and de-embedding, gating is a standard feature, and frequency offset for testing mixers. Transformation between the frequency and time domain, mixer/converter measurements and other analysis methods are also possible.
Tektronix TPI4000 protocol test platform
16 February, 2012Tektronix has introduced a protocol test platform that allows engineers to analyse, stimulate, stress and characterise high-speed serial links - with support for speeds up to 10 Gbps.
Tektronix TLA7SA16 and TLA7SA08 logic protocol analyser modules
08 June, 2010 byTektronix has announced a test solution for PCI Express 3.0, the next-generation PCIe specification, spanning protocol to physical analysis in a single tool.
Advantest R37XX vector network analysers
17 May, 2010 byThe 300 MHz and 6 GHz vector network analysers are designed to install in a PCI slot.
LeCroy LogicStudio 16 logic analyser
17 May, 2010 byLeCroy has announced the LogicStudio 16, a logic analyser with hardware that provides 16 channels with a sample rate of 1 GSps and maximum input of up to 100 MHz.
Anritsu Cell Master MT8213E compact handheld base station analyser
22 April, 2010The Cell Master MT8213E compact handheld base station analyser with good noise and RF performance and 10 MHz demodulation bandwidth has been released. It is suitable to test and verify the performance of installed 2G/3G/4G networks, including LTE, GSM/EDGE, W-CDMA/HSDPA, WiMAX and CDMA/EV-DO.
VoIP analysis system
17 September, 2009 byAgilent has introduced its enhanced NgN analysis system (NgNAS).
S-parameter measurements
15 September, 2009 byAnritsu has introduced the MN469xA series four-port test sets for use with its VectorStar MS4640A vector network analyser.
Anritsu vector network analysers
15 September, 2009Anritsu has added the MS2026B and MS2028B models to its VNA master family. Both satisfy RF and microwave cable and antenna analysis requirements with frequency coverage from 5 kHz to 6 GHz and 20 GHz.
ME7828a network analyser
28 July, 2009Anritsu has introduced the VectorStar Broadband ME7828a vector network analyser system that produces dynamic range, measurement speed, and calibration and measurement stability over the frequency range of 70 kHz to 110 GHz.
Node B analyser
10 May, 2005Anritsu has introduced the MT8220A UMTS Master, an ultra-portable handheld node B analyser.
