Test & measure

Thermo Scientific nProber IV nanoprober platform

04 August, 2020 | Supplied by: Thermo Fisher Scientific

Thermo Fisher Scientific has released the Thermo Scientific nProber IV nanoprober platform — a fault isolation system used by semiconductor fabs to precisely locate and characterise the nanometre-scale electrical faults that impact device performance.


Anritsu Field Master Pro MS2090A RTSA with IQ capture and streaming capability

08 July, 2020 | Supplied by: Anritsu Pty Ltd

Anritsu introduces IQ capture and IQ streaming options for its Field Master Pro MS2090A that are designed to make the real-time spectrum analyser (RTSA) the first handheld analyser to capture 110 MHz of IQ data.


Audio Precision APx500 version 6.0 audio measurement software

12 June, 2020 | Supplied by: Vicom Australia Pty Ltd

With this release, APx software supports multiple simultaneous input types, enabling the concurrent measurement of up to 16 channels of digital and eight channels of analog audio data.


Wireless mesh networking cuts water metering costs

02 June, 2020 | Supplied by: u-blox Singapore Pte Ltd

u-blox technology is being used in a data logger (pulse counter) for a smart water metering solution that relies on mesh networking to simplify deployment.


Magnetometry to measure the state of lithium-ion batteries

21 May, 2020

Scientists have presented a non-contact method for detecting the state of charge and any defects in lithium-ion batteries.


SIGLENT SSG5000X series RF signal generators

20 May, 2020 | Supplied by: IPD Group Limited

SIGLENT's SSG5000X series of signal generators can generate analog and vector signals. They have a frequency range of 9 kHz to 4/6 GHz and offer high performance in phase noise, spectral purity, bandwidth, EVM and output power.


Tektronix TBS2000B digital storage oscilloscope

08 May, 2020 | Supplied by: element14

Tektronix has released the entry-level TBS2000B digital storage oscilloscope, offering high performance and advanced debugging.


ICP DAS DL-300-WF-IP65 remote data logger module

27 April, 2020 | Supplied by: ICP Electronics Australia

The ICP DAS DL-300-WF-IP65 series is a gas detector monitoring module with Wi-Fi, Ethernet and RS-485 interfaces. It provides a WLAN connection that complies with the IEEE802.11b/g/n standards.


Narda Safety Test Solutions SignalShark Real Time Spectrum Analyzer

23 April, 2020 | Supplied by: Narda Safety Test Solutions GmbH

The SignalShark Real Time Spectrum Analyzer from Narda Safety Test Solutions is designed to be an open platform, created by integrating a powerful computer with the Windows 10 operating system.


Pico Technology PicoScope 6000E Series oscilloscopes

12 March, 2020 | Supplied by: Emona Instruments Pty Ltd

Pico Technology announces the PicoScope 6000E Series PC-based oscilloscopes, featuring eight channels with 500 MHz bandwidth, 16 digital channels and resolution of 8, 10 or 12 bits.


Testing high-throughput satellites: from prototyping to in-orbit verification

04 March, 2020 by Dr Rajan Bedi* | Supplied by: Spacechips

When developing satellite electronics, testing occurs throughout all stages of spacecraft development.


Keysight MSOX40224 2+16 channel 200 MHz oscilloscope

01 March, 2020 | Supplied by: TechRentals

Keysight's MSOX40224 mixed-signal oscilloscope is designed to offer next-generation performance, a 12″ touch screen and an intuitive interface to provide results quickly.


Monnit ALTA Industrial Wireless Three Phase AC Current Meter (500 Amp)

28 February, 2020 | Supplied by: Metromatics Pty Ltd

Monnit has introduced the ALTA Industrial Wireless Three Phase AC Current Meter (500 Amp), which measures the RMS current of an alternating current AC system by using three current transformers that wrap around the wires of a three-phase power system.


RBD 9103 USB Picoammeter

21 February, 2020 | Supplied by: Scitek Australia Pty Ltd

Rugged, portable and ASCII programmable, RBD's 9103 USB Picoammeter measures bipolar DC current from picoamps to milliamps. It can be biased with an optional built-in fixed 90 VDC bias or the user's own low-noise DC power supply.


Aim-TTi TGR2050 series RF signal generators

06 February, 2020 | Supplied by: element14

Aim-TTi has released the TGR2050 series of next-generation radio frequency (RF) signal generators, featuring a small footprint and lightweight design that should benefit electronic design and test engineers.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd