OKW PROTEC enclosures

Wednesday, 12 December, 2018 | Supplied by: ROLEC OKW Australia New Zealand P/L


Okw protec hr

OKW’s PROTEC enclosures have a modern and attractive square design with soft contours. As a result, the wall-mount and table-top housings are useful for modern electronics applications, both indoors and outdoors.

The enclosures have an inclination angle of 20°, which is considered ergonomically suitable for operating terminals and for reading off data. They can be ordered in three sizes, with dimensions of 140 x 140 x 76 mm, 180 x 180 x 92 mm and 220 x 220 x 108 mm, and are also available in three different versions.

Version I features a deep recessed interface area at the rear of the enclosure for the installation and protection of connectors, interfaces, switches and cables. Version II features a snap-on cover for flush covering of the recessed interface area. Version III has a deep cover for the recessed interface area, which is fitted by screws. The deep cover provides additional internal space for the electronics, cabling and connections.

A recessed operating area for integrating membrane keyboards, operating elements and touch systems has been provided in the square top cover. The top cover is screwed to the bottom part at the back with stainless steel Torx screws, and the entire screwed connection is thus hidden from view. The range of accessories for the enclosure series includes matching sheet aluminium holders, which allows hidden, secure wall mounting.

The series is made of high-quality V0 material in off-white. The electronics compartment can be sealed up to protection class IP65 by means of an accessory sealing kit — this is particularly useful for tough applications, eg, in the smart factory/IIoT, central control units, surveillance systems and access and security controls in industrial environments or outdoors. The series can also be used in many other sectors, such as data acquisition systems, data systems engineering, measuring and control engineering as well as medical technology and health care.

The enclosures can also be modified according to the user’s individual requirements, eg, with printing, mechanical machining for interfaces/displays, painting, EMC coating on the inner side of the enclosure and more.

For more information: https://www.okw.com.au/en/Plastic-enclosures/Protec.htm.

Online: www.okw.com.au
Phone: 02 4722 3388
Related Products

Würth Elektronik WE-SMGS solderable seal

Würth Elektronik's WE-SMGS is a solderable seal for surface mounting. The product...

Hammond Electronics 1557 plastic enclosure family

Hammond Electronics has announced its 1557 family. Initially available in four plan sizes, each...

EXAIR No Drip Internal Mix Atomizing Nozzles

No Drip nozzles are suitable where no post-spray drip is permissible. When the compressed air...


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd