Vincotech flow 0B housing for small power applications
Vincotech has released the flow 0B housing sized for small power applications. The flowCIP 0B with a PIM + PFC topology and flowPACK 0B with a six-pack topology are the first two lines to feature the housing.
The product is a smaller version of the flow 0 housing, designed to meet the demands of smaller power embedded drives, frequency inverters, solar applications and switching mode power supplies. The housing brings speed and flexibility in design, alongside miniaturising capability, low stray inductance and efficiency-enhancing features. A single screw is all it takes to mount the housing to the heat sink. The mounting bridge works like a clamp, applying considerable pressure to the DCB and heat sink.
The housing features free pin positioning, a stress relieved for pins, optional press-fit pins or pre-applied phase-change material. NTC, shunt resistors or capacitors can be directly mounted into the module.
Phone: 02 8883 4670
Thermaltronics TMT-R8000S soldering robot
The Thermaltronics TMT-R8000S soldering robot is designed to meet the requirements of high-speed...
ADLINK Technology IMB-M47, IMB-M47H industrial ATX motherboards
The industrial motherboards from ADLINK Technology are designed to enhance edge performance in a...
LabsLand Prism4 remote engineering hardware system
The Prism4 remote engineering hardware system is a modular structure for building interactive...