ICP DAS LC-103H lighting control module

Thursday, 01 July, 2021 | Supplied by: ICP Electronics Australia Pty Ltd

ICP DAS LC-103H lighting control module

ICP DAS’s LC-103H is an easy-to-use lighting control module that requires no specialist skills to install and operate, and no software is needed to control the DO channels.

The product provides one channel for digital input (photo couple isolation) and three channels for relay output. All output channels are from A-type relays, while the input channel is based on a sink-type using a wire connection. The input channel can directly control a 3-channel relay ON and OFF sequence without requiring a remote host controller. 4 kV ESD protection and 5000 Vrms intra-module isolation are also provided.

When required, communication with the module is programmable based on the DCON and Modbus RTU protocol, and different addresses can be set for DCON and Modbus RTU communication via hardware configuration. Furthermore, the module can survive tough environmental conditions as it can operate between -25 and +75°C.

Online: www.icp-australia.com.au
Phone: 02 9457 6011
Related Products

u-blox NORA-W4 Wi-Fi 6 module

The u-blox NORA-W4 Wi-Fi 6 module is suitable for IoT applications such as smart home, asset...

STMicroelectronics TSZ151 operational amplifiers

The STMicroelectronics TSZ151 operational amplifiers are designed to lend stability to circuits...

Neousys NRU-154PoE-FT Edge AI computer

The Neousys NRU-154PoE-FT Edge AI computer delivers up to 100 TOPS AI inference performance,...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd