Maxim MAX11102 low-power devices
Broadening its range of 12-/10-/8-bit ADCs, Maxim has introduced the MAX11102 family of low-power devices.
The family comprises nine devices available in different resolution (12-/10-/8-bit), channel-count (2/1) and conversion-rate (3/2 Msps) configurations.
Designed to extend battery life in portable electronics, the devices offer a maximum power consumption of 9.9 mW. Additionally, they are said to be the only ADCs able to operate from a supply rail down to 2.2 V. Fast wake-up and shutdown times enable them to operate in burst mode, which minimises the time spent in active power mode.
Providing power savings without compromising performance, the family of yields a worst-case SNR of 70.5 dB and SINAD of 70 dB. The digital interface operates from 1.5 to 3.6 V, allowing direct connection to a wide range of SPI-based host devices without a level shifter.
Pin-for-pin compatibility between devices allows designers to change resolution without redesigning their board or control software.
Phone: 02 9585 5511
Sensirion SFC6000D mass flow controller
The Sensirion SFC6000D mass flow controller is designed to be small and light, thereby allowing...
HYDAC EDS 3300 pressure switch
The HYDAC EDS 3300 pressure switch features an integrated digital display for relative pressure...
Questsemi silicon carbide (SiC) Schottky diodes
The Questsemi silicon carbide (SiC) Schottky diodes have been designed to improve the overall...