STMicroelectronics L99DZ200G door-zone system IC
STMicroelectronics is increasing the integration of automotive body electronics with the L99DZ200G door-zone system IC, which enables a single-chip front-drives-rear set-up managing a front-door window, mirror and lighting as well as the rear-window lift. The rich set of features delivers an equally rich set of benefits including low system quiescent current, fast assembly and short development time.
The L99DZ200G contains two H-bridge gate drivers, a gate driver for an external MOSFET to control mirror heating, a control block and high-side driver for electro-chromic mirror dimming, and five LED high-side drivers. Three of the high-side drivers can operate in constant-current mode to power lighting modules that have high input capacitance. The other two high-side drivers are suitable for controlling ordinary LEDs.
With its two H-bridge drivers, the IC can control two spindle motors simultaneously and handle an additional cinch motor to close a powered tailgate or trunk. Both drivers allow operation in generator mode, which activates both low-side MOSFETs simultaneously to protect the device if an overvoltage is detected in the supply rail.
The product also provides power management, with two 5 V low-dropout regulators for the host microcontroller and peripherals. Connections for control and communication include a LIN 2.2a (SAEJ2602, SAE J2962-1) transceiver, high-speed CAN (HS-CAN, ISO 11898-2:2003/-5:2007, SAE J2284, SAE J2962-2) transceiver and SPI 4.0 interface.
Diagnostic and protection features include temperature monitoring and thermal protection, a dedicated failsafe block to pull down the gates of the external high-side MOSFETs, and open-load and overcurrent detection for all outputs. A current-monitor output pin is provided for each high-side channel. Overcurrent recovery and thermal expiration allow operation to resume automatically after a fault. There is also reverse-battery protection and system-safety features including a configurable window watchdog and programmable reset generator.
For more information: www.st.com/l99dz200g-door-ic.
Phone: 02 9158 7200
NXP Semiconductors MCX series industrial and IoT microcontrollers
The MCX series of industrial and IoT microcontrollers features an innovative power architecture...
ADLINK COM-HPC-mMTL embedded module
The COM-HPC-mMTL embedded module features up to 16x PCIe lanes, 2 SATA interfaces and USB 3.0/2.0...
Axiomtek ROBOX300 robotics controller
The ROBOX300 robotics controller from Axiomtek is designed for autonomous mobile robots and...