Acromag SP330 series isolated signal splitters

Friday, 29 March, 2019 | Supplied by: Metromatics Pty Ltd


Acromag’s SP330 series isolated signal splitter/duplicators are designed to accommodate a broad variety of applications. Similar to the recently introduced SP230 loop-powered 2-wire series, the 4-wire DC-powered models are also software-configurable for precise conditioning of current, voltage or temperature input signals.

The splitters provide two isolated outputs, proportional to a single input, with a choice of process control signal formats (0–20 mA, 4–20 mA, 0–5 V, 0–10 V, ±5 V or ±10 V).

A standard USB port connects the splitter to a PC or Android device with Acromag’s free software for easy selection and scaling of I/O ranges. Power sources from 6–32 VDC are supported and can connect at the terminals, to a power bus along the DIN rail, or at both locations for redundancy.

The series modules operate from -40 to +75°C with high immunity to electrical noise and surge protection.

Online: www.metromatics.com.au
Phone: 07 3868 4255
Related Products

ADLINK COM-HPC-mMTL embedded module

The COM-HPC-mMTL embedded module features up to 16x PCIe lanes, 2 SATA interfaces and USB 3.0/2.0...

Axiomtek ROBOX300 robotics controller

The ROBOX300 robotics controller from Axiomtek is designed for autonomous mobile robots and...

Quectel YFCX001WWAH 5G transparent antenna

The 5G transparent antenna from Quectel uses advanced material science and micro-manufacturing...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd