Maxim MAX9622 precision operational amplifier
Maxim has introduced the MAX9622, a precision operational amplifier with high gain bandwidth that employs an auto-trimming technique to precisely calibrate the input-offset voltage (Vos) on power-up.
This enables the device to achieve a Vos of 100 µV(max) to allow the use of a small sense resistor, so improving system efficiency by reducing sense resistor power consumption.
The amp is suitable for active filter design and low-side current sensing in power modules and motor vehicle power supplies.
It features a rail-to-rail output, a 50 MHz gain bandwidth and an input common-mode voltage range that extends below ground. These features enable it to interact with a wide range of high-speed applications while providing high-frequency sampling and fast recovery from saturation.
The device is packaged in a tiny (2 x 2 mm) 5-pin SC70 and is fully specified over the -40 to +125°C motor vehicle temperature range.
Phone: 02 9585 5511
ADLINK COM-HPC-mMTL embedded module
The COM-HPC-mMTL embedded module features up to 16x PCIe lanes, 2 SATA interfaces and USB 3.0/2.0...
Axiomtek ROBOX300 robotics controller
The ROBOX300 robotics controller from Axiomtek is designed for autonomous mobile robots and...
Quectel YFCX001WWAH 5G transparent antenna
The 5G transparent antenna from Quectel uses advanced material science and micro-manufacturing...
