Switchcraft EN3 overmould options
11 September, 2012 | Clarke & Severn Electronic SolutionsClarke & Severn Electronics (CSE) has available overmould options for the EN3 line of products by Switchcraft. The three EN3 options have a rugged construction, more slimline style and good flex relief, making these overmoulded connectors suitable for harsh environments.
Conxall Data Con-X sealed mini-USB type B connectors
22 August, 2012 | Clarke & Severn Electronic SolutionsConxall has introduced the Data Con-X sealed mini-USB type B connectors that can be used to seal and standardise all data connections.
Harwin Datamate J-Tek crimp connector range
21 August, 2012 | Clarke & Severn Electronic SolutionsHarwin has increased the flexibility of its Datamate range by offering the male and female J-Tek crimp connectors with a choice of extended rear walls.
Harwin EZ BoardWare SMT spring contact range
21 August, 2012 | Clarke & Severn Electronic SolutionsHarwin’s EZ BoardWare SMT spring contacts (also known as grounding/RFI contacts, spring or shield fingers) can be assembled to PCBs and used as grounding or shielding contacts or for general electrical connections between PCBs or similar.
Switchcraft EN3 right-angle PC board mount 2-18 contact
13 July, 2012 | Clarke & Severn Electronic SolutionsThe Switchcraft EN3 right-angle PC board mount 2-18 contact has applications for any sealed data transmission, military or industrial GPS location devices, environmental monitoring, transport, medical data carts, marine and general industrial electronic applications.
Planar R54 vector reflectometer
09 May, 2012 | Clarke & Severn Electronic SolutionsPlanar R54 is a vector reflectometer designed for S11 parameter measurement.It provides high-accuracy measurements for magnitude and phase-in frequencies between 85 MHz and 4.2 GHz.
Planar 304/1 vector network analyser
09 May, 2012 | Clarke & Severn Electronic SolutionsThe Planar 304/1 vector network analyser’s capabilities include embedding and de-embedding, gating is a standard feature, and frequency offset for testing mixers. Transformation between the frequency and time domain, mixer/converter measurements and other analysis methods are also possible.
Planar 804/1 vector network analyser
09 May, 2012 | Clarke & Severn Electronic SolutionsMeasured parameters of the Planar 804/1 vector network analyser are S11, S22, S12 and S22 magnitude and phase.
Planar TR 1300/1 vector network analyser
09 May, 2012 | Clarke & Severn Electronic SolutionsThe Planar TR 1300/1 vector network analyser is a two-part, one-path device operating between 0.3 and 1300 MHz. Measured parameters are S11, S22 magnitude and phase.
Switchcraft EN3 overmould connector range
15 February, 2012 | Clarke & Severn Electronic SolutionsSwitchcraft has announced overmould options for its EN3 range of products.
Omnetics Connector right-angle micro circulars
09 November, 2011 | Clarke & Severn Electronic Solutions
Omnetics Connector has added another tail termination to its micro circular product range. Micro circulars have previously been available in four barrel sizes 5, 12, 16 and 27 positions, with the tail terminations being soldercup, prewired and straight thru-hole versions.
ARC Technologies Wave-X Heat shrinkable tube absorber
12 October, 2011 | Clarke & Severn Electronic Solutions
Wave-X Heat, from ARC Technologies, is a shrinkable tube absorber, designed to integrate with wire and cable assemblies, neatly sealing junctions and connector interfaces while absorbing unwanted EMI interference.
ODU Super Shorty short connector
12 October, 2011 | Clarke & Severn Electronic Solutions
ODU has developed an extremely short connector within the standard push-pull series ODU Mini-Snap.
Vaunix Technology Lab Brick LMS signal generator series
12 October, 2011 | Clarke & Severn Electronic Solutions
The Vaunix Technology Lab Brick LMS series of USB-compatible synthesised signal generators covers the X-band from 4 to 20 GHz with low phase noise, fast 100 µs switching time and fine 100 Hz frequency resolution.
Omnetics Connector latching Micro-D connector
06 June, 2011 | Clarke & Severn Electronic Solutions
Omnetics Connector has produced a latching system on its Micro-D connectors that replaces screws with finger-release side latches.
