MG inductor series from Gowanda Electronics responds to need in medical and other applications
08 August, 2007 | Clarke & Severn Electronic Solutions
The MG inductor series from Gowanda Electronics provides a breakthrough in inductor component technology. Inductors manufactured using traditional methods can exhibit magnetic characteristics that are undesirable in certain applications. Gowanda's MG series is manufactured using a novel approach that assures the inductors have non-magnetic characteristics.
Audio Pass-Through Patchbays and DB25 Cables from Switchcraft
09 July, 2007 | Clarke & Severn Electronic Solutions
Switchcraft has extended its innovative and popular range of StudioPatch patchbays by adding audio pass-through panels and ready-made DB25 cables.
Omnetics medical-grade connector design service
14 May, 2007 | Clarke & Severn Electronic Solutions
Omnetics Connector Corporation has expanded its manufacturing department by setting up a new service to assist its customers through the design phase. Now, by being able to offer samples and prototypes to customers for Initial Test, Biocompatibility and FDA Approvals.
Hermetically tight connectors
09 March, 2007 | Clarke & Severn Electronic Solutions
Whether in medical, military, automotive, avionics or aerospace technology - more and more the demand is required for 100% sealed tight connectors.
Connector technology
19 February, 2007 | Clarke & Severn Electronic Solutions
Harwin's Hot Shoe technology connectors employ spring-loaded or compliant contacts, which maintain a positive contact force against the mating half of the connector, ensuring reliable connection even under the most demanding conditions.
Rugged duty keyboard
04 December, 2006 | Clarke & Severn Electronic Solutions
The StacoSwitch series M777 enclosed 88-key rugged duty keyboard is designed for rugged duty computer applications where clean environments must be maintained.
ISM band antennas
08 November, 2006 | Clarke & Severn Electronic Solutions
Linx Technologies' Dipole Antenna Series has an internal design, eliminating the external ground plane requirements to maximise performance.
Surface-mounted device
03 October, 2006 | Clarke & Severn Electronic Solutions
Sprague-Goodman has released the SGC3 Series Chip Trimmer Capacitor product line, consisting of miniature ultra-thin surface-mounted devices designed for reflow soldering.
Mini-circuits publications
05 September, 2006 | Clarke & Severn Electronic Solutions
Clarke & Severn Electronics has released two new Mini-circuits publications. The Coaxial RF Broadcast Guide covers all the connectorised Mini-circuits products used in RF broadcast applications, ideal for field service engineers, systems engineers and technicians alike. Secondly, the RF/IF Microwave Designer's Guide covers the full range of Mini-circuits products, through hole, surface mount and connectorised parts.
Standard clock oscillators
03 August, 2006 | Clarke & Severn Electronic Solutions
Cardinal Components Inc. introduces new low phase noise, low jitter, high frequency, RoHS compliant programmable, LVPECL, LVDS, VCXO's and Standard Clock Oscillators.
Standard and weathertight connectors
04 July, 2006 | Clarke & Severn Electronic Solutions
A completely indoor/outdoor connector system that offers performance and reliability features of MIL-Spec connectors at the cost of a commercial type product.
EH series adaptor/connectors
01 June, 2006 | Clarke & Severn Electronic Solutions
Switchcraft's newest line of connectors, the EH Series, offers a wide range of connectors all within a standard XLR housing.
ZRL low noise very high IP3 amplifiers
03 April, 2006 | Clarke & Severn Electronic Solutions
Mini-Circuit's Blue Cell technology allows the use of its 90-degree splitters to enhance the performance of a family of medium power amplifiers.
Harwin's M80 Connector Series
02 March, 2006 | Clarke & Severn Electronic Solutions
Harwin's M80 Connector Series delivers certified reliability in military, aerospace and medical applications.
Push-pull connector
01 February, 2006 | Clarke & Severn Electronic Solutions
ODU Connector Systems of Germany has appointed Clarke & Severn Electronics as its new partner in Australia. ODU specialises in cylindrical connectors for medical & scientific applications in its Mini-Snap, Mini-Snap PC and Medi-Snap series and High Power/Mixed Combination matable connectors in their MAC (Modular Attachable Connector).
