Impedance match transformers
01 June, 2009 | Clarke & Severn Electronic Solutions
Switchcraft’s 366 and 367 impedance matching transformers are used to convert 110 Ω AES/EBU digital audio signals to 75 Ω signals and 75 Ω signals to 110 Ω.
Sealed connectors
01 June, 2009 | Clarke & Severn Electronic Solutions
Omnetics MIL-DTL-32139 compatible hermetic connectors are suitable for high-pressure applications that require low leakage rates such as optics, cryogenics, petroleum, space and UAV systems.
Instrument direct box
01 June, 2009 | Clarke & Severn Electronic Solutions
Switchcraft has launched an instrument direct box, the SC800.
QAM amplifiers
01 June, 2009 | Clarke & Severn Electronic Solutions
TriAccess Technologies has developed a product range of radio frequency integrated circuit (RFIC) products specifically designed to meet the RF requirements of DOCSIS-based Edge quadrature amplitude modulation (QAM) systems.
RF amplifiers
01 June, 2009 | Clarke & Severn Electronic Solutions
The TAT8800 range of amplifiers is fabricated using GaAs to deliver performance with low noise and is optimised to deliver lower costs for CATV operators.
Laminate range
17 April, 2009 | Clarke & Severn Electronic Solutions
Taconic’s TLX range of laminates provides tight tolerance and controlled electrical and mechanical properties.
Specialised connectors
17 April, 2009 | Clarke & Severn Electronic Solutions
ODU connectors for magnetic resonance tomograph devices provide between 30,000 and 60,000 mating cycles through the contacts in the spring wire system.
Thermal connectors
17 April, 2009 | Clarke & Severn Electronic Solutions
Recording temperatures plays an increasingly important role in engineering and high-precision temperature probes and evaluation devices are used.
High-speed diode
14 April, 2009 | Clarke & Severn Electronic Solutions
The CMAD4448 120 V, 250 mA ultra high speed switching diode in the FEMTOmini SOT-923 package is designed for applications requiring a high-speed diode in an ultra-small package. The device uses 50% less board space compared with the SOD-0523, and has a 32% lower package profile.
Energy-efficient transistors
14 April, 2009 | Clarke & Severn Electronic Solutions
Central Semiconductor has released the Femtomini CMNT3904E (NPN) and CMNT3906E (PNP) low VCE(SAT) transistors, packaged in the SOT-953.
USB power sensor
14 April, 2009 | Clarke & Severn Electronic Solutions
Mini-Circuits has released the PWR-6G+, a multi-channel USB power sensor with a 50 dB dynamic range that is supplied with power meter software that turns the PC/laptop into a power meter.
Audio splitters
01 January, 2009 | Clarke & Severn Electronic Solutions
Switchcraft has added two audio splitters that provide eight inputs and 24 dual transformer-isolated outputs.
Hermetically sealed bi-lobe connectors
10 November, 2008 | Clarke & Severn Electronic Solutions
Hermetic connectors are suitable for high-pressure applications that require low leakage rates such as optics, cryogenics, petroleum, space and UAV systems. The connectors are available in weld-able or solder-able bulkhead mounts with 9–65 positions.
RF and microwave laminate
07 September, 2008 | Clarke & Severn Electronic Solutions
Taconic’s TLX range of laminates can be sheared, drilled, milled and plated using standard manufacturing methods for PTFE/woven fibreglass materials. The laminates are dimensionally stable and exhibit virtually no moisture absorption during fabrication.
Push-pull connectors
10 August, 2008 | Clarke & Severn Electronic Solutions
ODU puts everything in one push-pull connector. Devices are getting smaller and smaller, and so the room available for connectors in or on these devices is becoming more and more limited. In such cases, it is often necessary to combine individual connectors into one — for example, fluids, electricity and signals.
