CAN controllers
17 April, 2009 | ERNTEC Pty Ltd
The compact Faulhaber motion controllers can be optionally operated via an RS232 or CAN interface.
Enhanced DIN connectors
17 April, 2009 | ERNTEC Pty Ltd
Erni Electronics has redesigned its right-angle female DIN connectors for daughter card applications.
22 mm stepper motor
17 April, 2009 | ERNTEC Pty Ltd
The two-phase miniature stepper motor with a diameter of 22 mm and a high power-to-volume ratio, the AM 2224, achieves an output of 2.5 W and a peak holding torque of 45 mNm.
Miniature stepper motor
17 April, 2009 | ERNTEC Pty Ltd
With a good power-to-volume ratio, 6 mm outer diameter, 9.3 mm length and weighing 1.4 g, the ADM 0620 is claimed to be the smallest two-phase miniature stepper motor in the world.
Power modules extended
14 April, 2009 | ERNTEC Pty Ltd
Erni Electronics has upgraded its hard metric universal power module to include new 5-, 6- and 7-pin versions. The UPMs augment the existing 3-pin power modules and match their current carrying capacity of 18A per contact (at 20ºC).
PCI Express connectors
01 April, 2009 | ERNTEC Pty Ltd
Erni is offering a 1 mm centreline PCI Express (PCIe) connector family that includes X1 (36 pins), X4 (64 pins), X8 (98 pins) and X16 (164 pins) right-angled connectors.
Erni D-sub power connectors
01 August, 2008 | ERNTEC Pty Ltd
Erni has available a range of D-sub connectors with precision stamped high-current contacts to meet the needs of SMT, through-hole reflow and press fit applications.
Connector wizard
01 July, 2008 | ERNTEC Pty Ltd
Erni Electronics has introduced its Connector Application Wizard that simplifies connector selection to best match the needs of the specific PCB design requirements.
Power modules extended
01 June, 2008 | ERNTEC Pty Ltd
Erni Electronics has upgraded its hard metric universal power module to include new 5-, 6- and 7-pin versions. The UPMs augment the existing 3-pin power modules and match their current carrying capacity of 18A per contact (at 20ºC).
RFID reader chipset
03 April, 2006 | ERNTEC Pty Ltd
Anadigm has announced the RangeMaster2 RFID reader 3.3 V chip set that allows system vendors to design and maintain a single reader that can be customised to read different radio frequency identification tag types, with different modulation types and frequencies.
Horizontal multi-LEDs
02 March, 2006 | ERNTEC Pty Ltd
Suitable for displaying switching status, Mentor has developed horizontal SMD components for 3 mm LEDs. Between one and six LEDs, which are available in various quality, colours and combinations of colours, are integrated in the housing.
Compliant connectors
06 December, 2005 | ERNTEC Pty Ltd
Erni says that the CompactPCI Express PICMG EXP.0 R1.0 specification is supported by compliant ERmet ZD and HM ERmet connectors.
Thin profile DC-Micromotors
19 April, 2004 | ERNTEC Pty Ltd
The centrepiece of each thin profile DC-Micromotor is the ironless rotor with its three flat oval copper coils.
Protective covers
09 September, 2003 | ERNTEC Pty Ltd
ERNI provides protective covers for the pre-alignment guides from breaking on 2 mm hard metric right angle and vertical female connectors.
Illuminated knobs
11 August, 2003 | ERNTEC Pty Ltd
The illuminated control knob from Mentor makes it possible to see the exact setting of the knob, regardless of the ambient light.
