ICP DAS I-2533CS-FD CAN/CAN FD to single-mode fibre bridge
22 October, 2021 | ICP Electronics Australia Pty LtdICP DAS's I-2533CS-FD is a local CAN/CAN FD (CAN with flexible data-rate) bridge used to establish a connection between two CAN bus systems via a single-mode fibre-optic transmission medium.
ICP DAS RPS-4M/W4 industrial redundant power supplies
19 October, 2021 | ICP Electronics Australia Pty LtdThe RPS series not only adopts N+1 parallel-connection and load-sharing technology to implement power redundancy, it also adds communication functions so that power supply information can be monitored in real time.
ICP DAS PET-7065 Ethernet I/O module
18 October, 2021 | ICP Electronics Australia Pty LtdICP DAS's PET-7065 is an Ethernet I/O module with 6-channel PhotoMOS relay and 6-channel DI.
ICP DAS IEC850-211-S Modbus TCP to IEC-61850 gateway
15 October, 2021 | ICP Electronics Australia Pty LtdThe network gateway allows the IEC-61850 MMS client to access the Modbus TCP network as a Modbus TCP client.
ICP DAS G-4510 power-saving PAC with solar charger
12 October, 2021 | ICP Electronics Australia Pty LtdICP DAS's G-4510 series are M2M (machine-to-machine) power-saving PACs that come with a solar charger.
iEi DRPC-130-AL fanless DIN-rail embedded system
01 October, 2021 | ICP Electronics Australia Pty LtdiEi's DRPC-130-AL fanless DIN-rail embedded system supports the Intel Apollo Lake x5-E3930 1.3 GHz (up to 1.8 GHz, dual core), 4 GB DDR3L pre-installed memory and 12–24 VDC.
iEi IRS-100-ULT3 rolling stock computer
29 September, 2021 | ICP Electronics Australia Pty LtdiEi's IRS-100-ULT3 is a rolling stock computer featuring a variety of technologies. It is suitable for traffic safety, passenger information and video surveillance systems.
iEi PPC-F08B-BT fanless industrial panel PC
28 September, 2021 | ICP Electronics Australia Pty LtdiEi's PPC-F08B-BT is powered by an Intel Celeron J1900 quad-core onboard SoC (2 GHz) with 8 GB RAM. It is available in sizes 5.7″, 8″ and 10.4″.
iEi WAFER-BT-E38001W2 single-board computer
22 September, 2021 | ICP Electronics Australia Pty LtdiEi's WAFER-BT-E38001W2 is a 3.5″ single-board computer with an Intel 22 nm Atom SoC.
iEi Mustang-V100-MX4 computing accelerator card
10 September, 2021 | ICP Electronics Australia Pty LtdiEi's Mustang-V100-MX4 is a deep learning convolutional neural network acceleration card for speeding up AI inference in a flexible and scalable way.
ICP DAS DNM-831I-600V-1000A voltage attenuator and current transformer
07 September, 2021 | ICP Electronics Australia Pty LtdICP DAS's DNM-831I-600V-1000A is 1-channel voltage attenuator (600 V) and 1-channel current transformer (1000 A).
iEi IDS-310AI fanless ultracompact AI edge computing device
01 September, 2021 | ICP Electronics Australia Pty LtdiEi's IDS-310AI fanless, ultracompact, artificial intelligence edge computing system is pre-installed with a Mustang-MPCIE-MX2 AI accelerator card, which includes two Intel Movidius Myriad X VPUs, to provide a flexible deep learning solution.
iEi PulM-100G2SF network interface card
30 August, 2021 | ICP Electronics Australia Pty LtdThe product is an efficient and resourceful network module that can be partnered with other hardware to become part of a large-scale technological solution.
iEi S19M 19″ IP66 Marine Monitors
27 August, 2021 | ICP Electronics Australia Pty LtdiEi's S19M 19″ IP66 Marine Monitors offers good visual performance, featuring full OSD function configuration, 0–100% full-range dimming, 178°/178° wide viewing angles, 1280 x 1024 max resolution and 0.3075 x 0.3075 mm pixel pitch.
iEi KINO-DH310 Mini-ITX SBC
20 August, 2021 | ICP Electronics Australia Pty LtdIn terms of I/O interface the device supports 2x external RS-232, 1x internal RS-232, 4x external USB 3.2 Gen1x1, 4x internal USB 2.0 and 1x PS/2.
