Metromatics Pty Ltd Products

Nova Electric NGLM series DC/AC inverters

12 November, 2019 | Metromatics Pty Ltd

Nova Electric's rugged NGLM inverters are designed to provide many years of service in high shock, vibration, humidity and EMI environments in compliance to RTCA/ DO-160G and MIL-STD-704F.

Crystal Group Network Attached Storage (NAS) cybersecurity solution

05 November, 2019 | Metromatics Pty Ltd

Crystal Group's Network Attached Storage (NAS) cybersecurity solution offers hardware-level protection of data classified as top-secret and below in dynamic environments and across multidomain battlefields.

Acumentrics Pack-Power portable UPS system

22 October, 2019 | Metromatics Pty Ltd

Acumentrics' portable Pack-Power device is a small, lightweight, autonomous and flexible UPS system that can be standalone or integrated into a soldier's backpack, making it suitable for defence expeditionary applications.

Monnit ALTA Wireless Water Detection Puck Sensor

16 October, 2019 | Metromatics Pty Ltd

The sensor is designed to simplify water intrusion monitoring in crawl spaces, sub-floor areas, basements and elevator shafts, and locations where water damage is a threat to valuable materials, machinery or electronics.

Dytran CAN-MD digital smart accelerometer network

10 October, 2019 | Metromatics Pty Ltd

The CAN-MD (Controller Area Network – Machinery Diagnostics) accelerometer, from Dytran Instruments, is a bus-based, digital smart accelerometer network with configurable firmware for machinery health monitoring and diagnostics.

Lord Sensing SG-Link-200 wireless sensor

03 September, 2019 | Metromatics Pty Ltd

The SG-Link-200 is a 3-channel wireless sensor for precise measurement of a large range of sensor types, including strain gauges, load cells, pressure transducers and accelerometers.

LORD Sensing G-Link-200 rugged wireless accelerometer

07 August, 2019 | Metromatics Pty Ltd

The G-Link-200 is a battery-powered, wireless, 3-axis accelerometer with a rugged, weatherproof enclosure.

Dytran 3030B5 series miniature accelerometers

31 July, 2019 | Metromatics Pty Ltd

The Dytran 3030B5 series of miniature IEPE piezoelectric accelerometers feature a rugged stainless steel construction and are available with an abbreviated low-end frequency response as low as 2 Hz.

Dytran series 3623 submersible triaxial accelerometer

25 July, 2019 | Metromatics Pty Ltd

The Dytran series 3623 is an IEPE, case isolated, IP68 rated (submersed to 175 psi) triaxial accelerometer.

Dytran 3133 series miniature triaxial accelerometers

05 July, 2019 | Metromatics Pty Ltd

The Dytran 3133 series of ultraminiature, hermetically sealed, IEPE triaxial accelerometers, weighing just 0.8 g, are designed to mount in spaces inaccessible to other types of accelerometers.

Dytran Instruments model 3262C ultrahigh-temperature accelerometer

07 June, 2019 | Metromatics Pty Ltd

Dytran Instruments has released the model 3262C — a high-temperature differential output accelerometer that operates at up to 649°C and can survive temperature excursions up to 760°C.

Technology Dynamics TTST-5000 Series DC-DC converters

23 May, 2019 | Metromatics Pty Ltd

Technology Dynamics has introduced the TTST-5000 Series of high DC input voltage DC-DC converters. The series features an input range of 375–420 VDC, making it suitable for harsh industrial, railway, military, automation, specialty vehicle, scientific and telecom applications.

Crystal Group RE1529 Rugged Embedded Computer

14 May, 2019 | Metromatics Pty Ltd

Crystal Group's RE1529 Rugged Embedded Computer is feature-rich, configurable and engineered with the latest commercial off-the-shelf (COTS) technologies.

Acromag XMC730 multifunction I/O XMC mezzanine modules

07 May, 2019 | Metromatics Pty Ltd

Acromag has introduced the XMC730 mezzanine modules, which provide flexible, high-density I/O with high-performance DMA to solve a variety of SWaP challenges.

Acromag SP330 series isolated signal splitters

29 March, 2019 | Metromatics Pty Ltd

Acromag's SP330 series isolated signal splitter/duplicators provide two isolated outputs, proportional to a single input, with a choice of process control signal formats (0–20 mA, 4–20 mA, 0–5 V, 0–10 V, ±5 V or ±10 V).

  • All content Copyright © 2025 Westwick-Farrow Pty Ltd