Kremford Hyperdrive10 High Power Stepper Motor Controller
01 September, 2020 | Kremford (Vic) Pty LtdCapable of up to 10 A peak and up to 64 V, Kremford's Hyperdrive10 High Power Stepper Motor Controller can drive medium through to the very largest stepper motors.
iEi ITG-100AI fanless ultra compact AI embedded system
01 September, 2020 | ICP Electronics AustraliaThe ITG-100AI's palm-sized design features base I/O interfaces to support various applications and is equipped with a pre-installed Mustang-MPCIE-MX2 AI accelerator card.
Texas Instruments IWR6x mmWave sensors for industrial radar systems
28 August, 2020 | Mouser ElectronicsThe IWR6x mmWave sensors, from Texas Instruments (TI), allow engineers to integrate mmWave technology into a broad range of factory automation, radar, robotics and building automation designs.
Toshiba TLP3407SRA, TLP3475SRHA and TLP3412SRHA photorelays
28 August, 2020 | Toshiba (Australia) Pty LtdToshiba Electronic Devices & Storage Corporation has launched the TLP3407SRA, TLP3475SRHA and TLP3412SRHA photorelays in the S-VSON4T package, featuring a minimal mounting area of 2.9 mm2 and an extended operating temperature of 125°C.
Matrox AltiZ 3D profile sensors
28 August, 2020 | Dindima Group Pty LtdMatrox Imaging announces the Matrox AltiZ series of integrated high-fidelity 3D profile sensors, featuring a dual-camera single-laser design.
Tektronix 8 Series sampling oscilloscope platform
26 August, 2020 | Vicom Australia Pty LtdTektronix has announced the 8 Series sampling platform — a disaggregated modular instrument series featuring parallel acquisition.
STMicroelectronics IIS2ICLX inclinometer
26 August, 2020 | STMicroelectronics Pty LtdThe IIS2ICLX from STMicroelectronics is a low-power, 2-axis digital inclinometer for use in applications such as industrial automation and structural health monitoring.
STMicroelectronics IPS160HF and IPS161HF intelligent power switches
25 August, 2020 | STMicroelectronics Pty LtdWith power-on delay time of less than 60 µs, the IPS160HF and IPS161HF satisfy standardised requirements for interface types C and D in Safety Integrity Level (SIL) Class 3 applications.
HUBER+SUHNER Q-ODC-2 Mini outdoor fibre-optic connector
25 August, 2020 | Huber+Suhner Aust Pty LtdHUBER+SUHNER has launched the Q-ODC-2 Mini — said to be its smallest ever outdoor fibre-optic connector — to enable more flexible and higher capacity deployments of wireless infrastructure in industrial and communication applications.
Keysight Technologies RP7900 Series regenerative power supplies
24 August, 2020 | Keysight Technologies Australia Pty LtdKeysight Technologies is expanding its RP7900 Series with two bidirectional, regenerative DC power supplies providing integrated safety features that protect people and devices under test (DUT).
Crystal Group RS4105L22 rugged 4U server
24 August, 2020 | Metromatics Pty LtdCrystal Group's RS4105L22 rugged server offers high-end computing performance in a 4U chassis with a depth of 55.9 cm, which should fit most rack spaces.
Weiss Technik accelerated ageing test chambers
21 August, 2020 | Simultech AustraliaWeiss Technik's accelerated ageing test chambers enable the control of temperature and humidity, and can be incorporated into ageing tests for performing failure-rate data and reliability analysis.
Avalue ECS-APCL fanless system
21 August, 2020 | AvalueThe ECS-APCL fanless system features a lightweight and compact design that makes it suitable for various application markets with multi-connectivity interfaces.
Hi-Q Components plastic screws, nuts, bolts and washers
20 August, 2020 | Hi-Q Electronics LtdFor engineering and assembly, Hi-Q has a large range of nylon machine screws, nuts, bolts and washers.
Neousys Technology PB-9250J-SA intelligent power backup module
20 August, 2020 | Backplane Systems Technology Pty LtdNeousys Technology's PB-9250J-SA is a standalone power backup module that utilises supercapacitor technology and incorporates a microprocessor for intelligent operation.
