Agilent E5071CEP/E5061BEP ENA network analyser series
12 August, 2011 | Agilent Technologies Australia Pty Ltd
Express configurations have been introduced for the ENA series of network analysers. Express configuration products provide fast, off-the-shelf delivery of the most popular test and measurement configurations.
Microchip Kalkitech DLMS protocol stack
12 August, 2011 | Microchip Technology Australia
Microchip has partnered with Kalki Communication Technologies (Kalkitech) to provide a device language message specification (DLMS) protocol stack that is optimised for 16-bit PIC microcontrollers.
Kontron 4U PCI761 industrial server
12 August, 2011 | Kontron Australia Pty Ltd
The KISS industrial server family has been expanded with the 4U PCI761.
Agilent E5072A vector network analyser
11 August, 2011 | Agilent Technologies Australia Pty Ltd
The E5072A vector network analyser is available as either a two-port, 30 kHz to 4.5 or 8.5 GHz instrument. It has improved performance over current RF network analysers, enhanced functionality, a configurable test set and a wide output power level for full characterisation of devices.
Fluke Networks Fiber QuickMap fibre troubleshooter
11 August, 2011 | Fluke Networks
Fiber QuickMap is a troubleshooter for enterprise network technicians that provides immediate visibility into the most common causes of failure and poor performance in data centre networks, including high-loss events like breaks in multimode fibre.
Renesas 100 A MOSFETs for motor drives
11 August, 2011 | Braemac Pty Ltd
Renesas has developed a 100 A MOSFETs for motor drives in consumer products, such as cordless power tools and power-assisted bicycles.
ERNI MiniMez board-to-cable connector
11 August, 2011 | ERNTEC Pty Ltd
ERNI is expanding its 1.27 mm Blindmate connector system, MiniMez, with a board-to-cable solution. It uses the board-to-board MiniMez connectors with thick side walls to ensure polarised mating without the concern of housing wall breakage.
TE Connectivity PCB connectors
10 August, 2011 | Commscope
TE Connectivity (TE), formerly Tyco Electronics, has released 0.25 mm pitch flexible printed circuit connectors (slantingly inserted FPC type).
GE Intelligent Platforms rugged automatic video tracker
10 August, 2011 | Metromatics Pty Ltd
GE Intelligent Platforms has released its rugged automatic video tracker.
B&B Electronics ELinx ESW100 ethernet switches
10 August, 2011 | Micromax Pty Ltd
B&B Electronics has expanded its industrial unmanaged ethernet switches with the ELinx ESW100 series featuring LC small-form-factor fibre connectors.
California Instruments CSW power supplies
09 August, 2011 | Westek Electronics Pty Ltd
The California Instruments CSW power supplies are programmable for tests including full compliance testing to many EMC and avionics standards.
International Rectifier IRLHS6276 power MOSFETs
09 August, 2011 | Avnet Electronics Marketing
International Rectifier has enhanced its PQFN offering with the introduction of a PQFN 2 x 2 mm and PQFN 3.3 x 3.3 mm package that integrate two HEXFET MOSFETs, using the latest silicon technology, to deliver a high density solution for low power applications.
Microchip Technology chipKIT development platform
09 August, 2011 | Microchip Technology Australia
Microchip Technology and Digilent have launched what they claim is the first 32-bit-microcontroller-based, open-source development platform that is compatible with Arduino hardware and software.
Microchip SST12LP17E/SST12LP18ERF power amplifiers
08 August, 2011 | Microchip Technology Australia
Microchip has expanded its RF power amplifier portfolio, with the SST12LP17E and SST12LP18E devices.
RECOM R0.25S DC/DC converters
08 August, 2011 | Cutter Electronics
RECOM has released the R0.25S series of converters in open frame SMD design with improved efficiency and extended ambient temperature. The compact 0.25 W single output devices can be used in many industrial low power applications and are also approved for medical applications.
