Osram LED Light for You service network with system integrators
22 April, 2010 | Osram Australia Pty Ltd
In addition to existing partners from optics, thermal management and electronics, the LED Light for You (LLFY) network now includes system integrators.
Microchip Technology miniature single-I/O bus UNI/O EEPROM devices
22 April, 2010 | Microchip Technology Australia
Microchip Technology has announced that its single-I/O bus UNI/O EEPROM devices are now available in miniature, wafer-level chip-scale and TO-92 packages, in addition to the 3-pin SOT-23 package.
Linear Technology LTC3614 synchronous buck regulator
22 April, 2010 | element14
The LTC3614 is a high-efficiency synchronous buck regulator from Linear Technology that incorporates a constant frequency, current mode architecture capable of switching frequencies up to 4 MHz.
B&K Precision XLN series of DC power supplies
22 April, 2010 | Unispan Instruments Pty Ltd
The B&K Precision XLN series of DC power supplies provides up to 1440 W of power in a 1U, full-rack case for rack mounting in an ATE environment or for benchtop use.
B&K Precision models 4076 and 4079 50 MHz arbitrary waveform/function generators
22 April, 2010 | Unispan Instruments Pty Ltd
B&K Precision has announced two 50 MHz arbitrary waveform/function generators, models 4076 and 4079, that allow design of a required signal by using the generator’s function or arbitrary waveform section.
Advantech NCP-7560 Packetarium network platform
22 April, 2010 | Advantech Australia Pty Ltd
Advantech’s Network and Telecom Group has released its high-end Packetarium platforms for wire-speed packet processing. The NCP-7560 is a 4U rackmount network appliance, scalable from 12 to 96 cores based on the Cavium Networks Octeon Plus network processor.
ICP Electronics ISC-4110U/8110U industrial media converter series
22 April, 2010 | ICP Electronics Australia Pty Ltd
ICP Electronics has launched the ISC-4110U/8110U industrial media converter series. The 4110U offers USB to 4x RS232 serial ports, while the 8110U features USB to 8x RS232 serial ports.
Mornsun URA_LD-20 W DC/DC converter
22 April, 2010 | DLPC Pty Ltd
Mornsun has launched a 4:1 wide input, dual output 20 W isolation DC/DC converter URA_LD-20 W which meets EMI standards.
Siemens Simatic CPU 317TF-2DP controller
22 April, 2010 | Siemens Ltd
The Simatic CPU 317TF-2DP controller enables motion control, safety and standard tasks in one device. It uses PLCopen-compatible motion control blocks. It is suitable for applications from controlled single-axis positioning to complex, synchronised sequences of motion, eg, geared synchronous motion, curve synchronisation or print mark correction.
MEN CT12 3U CompactPCI transition module
22 April, 2010 | Dominion Electronics
The CT12 is a 3U CompactPCI transition module for use in combination with MEN’s PICMG 2.30-based single board computers.
Dominion Electronics G501 CompactPCI serial hard drive carrier board
22 April, 2010 | Dominion Electronics
The G501 is a CompactPCI serial hard disk drive carrier board, designed to carry a 2.5″ SATA hard disk drive (RAID level depending on the CPU) or a solid-state drive.
Moxa IMC-P101 series industrial PoE media converters
22 April, 2010 | CrispTech Pty Ltd
Moxa has announced the IMC-P101 series UL508-certified industrial PoE media converters that provide IEEE 802.3af PoE ethernet-to-fibre media conversion from 10/100BaseT(X) to 100BaseFX(SC/ST) in a -40 to 75°C operating temperature range in harsh environments.
FiberSensing FS 6500 FBG accelerometer
22 April, 2010 | Bestech Australia Pty Ltd
Bestech Australia has released the FS 6500 FBG accelerometer from FiberSensing.
ICP Electronics PM-PV-D510/N450 PC/104 low-power SBCs
22 April, 2010 | ICP Electronics Australia Pty Ltd
ICP Electronics has released the PM-PV-D510/N450 PC/104 low-power SBCs based on the Intel Atom D510 and N450 processors.
Farnell LTC3521 buck-boost with step-down DC/DC converters
22 April, 2010 | element14
The LTC3521 combines a synchronous 1A buck-boost DC/DC converter with dual 600 mA synchronous step-down DC/DC converters to offer three output rails with efficiencies as high as 95%. Its input range of 1.8 to 5.5 V makes it compatible with all types of PC card slots, USB and single-cell Li-Ion or dual/triple-cell alkaline/NiCd/NiMH applications.