congatec conga-TS370 COM Express Type 6 Computer-on-Modules
09 April, 2018 | Supplied by: Congatec Australia Pty LtdThe conga-TS370 COM Express Type 6 Computer-on-Modules feature high-bandwidth I/Os including 4x USB 3.1 Gen 2 (10 Gbps), 8x USB 2.0 and 1x PEG and 8 PCIe Gen 3.0 lanes for powerful system extensions including Intel Optane memory.
Lasers made of quantum dots could work with silicon
06 April, 2018US researchers are looking to break the 'silicon bottleneck' that occurs when the signal from fibre-optic cables arrives at data centres.
Southco AC-EM 05 Electronic Actuator
05 April, 2018 | Supplied by: McNaughtansWhen connected to an electronic access control device, the AC-EM 05 Electronic Actuator can be used to actuate a mechanical latch to remotely open or unlock a door or panel.
maxon motor BLDC brushless DC linear actuator
03 April, 2018 | Supplied by: maxon motor Australia Pty LtdThe maxon motor BLDC combination linear actuator features a useful mixture of fast movements, high torque and holding ability. A precision ground metric thread and nut assembly can be customised to suit individual application mounting requirements.
Renesas Electronics RH850/E2x Series on-chip flash memory microcontroller
03 April, 2018 | Supplied by: Renesas ElectronicsThe RH850/E2x Series MCU incorporates up to six 400 MHz CPU cores, achieving processing performance of 9600 MIPS.
u-blox ANNA-B1 industrial Bluetooth 5 module
02 April, 2018 | Supplied by: u-blox Singapore Pte Ltdu-blox has announced the ANNA-B1 Bluetooth 5 module for industrial applications. Its ultracompact module design and industrial operating temperature range make it suitable for wide-ranging applications in size-constrained designs requiring high-speed Bluetooth connectivity.
Advantech MIO-2360 Pico-ITX board
01 April, 2018 | Supplied by: Advantech Australia Pty LtdAdvantech's 2.5″ Pico-ITX SBC MIO-2360 is designed with the Intel Pentium N4200 and Intel Celeron N3350 processor. It provides high CPU and graphic performance as well as various expansion interfaces, including miniPCIe, mSATA and Advantech's MI/O extension.
Fuel injection electronics for greener motorcycles
30 March, 2018 | Supplied by: STMicroelectronics Pty LtdAchieving the goals of the China IV motorcycle legislation, intended to promote better emission performance, is only possible using electronic fuel injection (EFI).
Empower RF Systems 1205/BBM3K5OEL solid-state high-power amplifier
30 March, 2018 | Supplied by: Wireless ComponentsThe 1205/BBM3K5OEL power amplifier is suitable for broadband mobile jamming, communications, general test and band-specific applications from 500 to 2700 MHz.
The next generation of HD
29 March, 2018An international research team is paving the way for brighter, lighter and more energy-efficient TVs and smart devices.
Artila Electronics M-X6ULL system-on-module
28 March, 2018 | Supplied by: Micromax Pty LtdThe M-X6ULL is designed to meet the needs of many general embedded applications that require a power-efficient, high-performance solution, as well as embedded systems that require high-end multimedia applications in a small form factor.
Graphite-coated relays can withstand harsh environments
26 March, 2018Researchers have created microelectromechanical relays suitable for harsh environments — by coating the contacts with nanocrystalline layers of graphite.
maxon motor zero-backlash servo gearmotor
22 March, 2018 | Supplied by: maxon motor Australia Pty Ltdmaxon motor has released a servo motor and gearhead combination that can produce 364 Nm with a peak torque rating at the output of 686 Nm.
Phoenix Contact PTCB electronic circuit breaker
21 March, 2018 | Supplied by: Phoenix Contact Pty LtdPhoenix Contact has released a compact, single-channel electronic circuit breaker — the PTCB. Measuring 6 x 106 mm, the electronic circuit breaker offers space-saving circuit protection and potential distribution.
Embroidering electronics into the next generation of 'smart' fabrics
16 March, 2018 by Asimina Kiourti, The Ohio State UniversityOhio State University is embroidering electronics directly into fabrics using conductive threads, which the university calls 'e-threads'.
