The Power over Ethernet HAT for the Raspberry Pi 3 Model B+ enables a Raspberry Pi to be powered via an Ethernet cable, removing the need for a separate power supply.
WAGO's Wireless Ethernet Gateway, which meets the IP65 degree of protection and has an internal directional antenna, is suitable for harsh industrial environments.
The G211X Ethernet interface card, from MEN Mikro Elektronik, is a quad Ethernet card based on the PICMG CPCI-S.0 CompactPCI Serial. The four Gigabit Ethernet interfaces on the front panel are accessible via robust, X-coded M12 connectors.
Interworld Electronics has released the MLiS MLB-E41119-16 16-port unmanaged Industrial Ethernet switch with 10/100 Mbps auto negotiating copper RJ45 ports.
The Trio Flex slice series of add-ons allow simple extension of an existing or new EtherCAT network.
By using current sensing transducers and Ethernet I/O modules, remote motors located anywhere in your operation can be easily monitored.
Acromag has expanded its BusWorks XT Series of ethernet I/O modules to include models with multiple I/O functionality.
The WISE-4000 series ethernet I/O modules can be used without needing to go through a gateway to provide the information. Deployment is easy as a limitless number of I/O modules can be used to gather the information from any third-party sensors and connect to an existing network.
Designed to reduce installation and test set-up costs while improving signal quality, the 16-channel PI 7200 and PI 7300 data acquisition systems (DAS) function as ethernet-connected appliances that condition, amplify and digitise outputs from strain gauges, bridges, IEPE or voltage transducers.
ICP Electronics has expanded its ECAT-2000 Series of EtherCAT (Ethernet for Control Automation) slave I/O modules designed for industrial monitoring and control applications.
ICP DAS's ET-2260 is an IP-based ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M ethernet network by using Modbus TCP/UDP protocol. It is easily integrated within HMI, SCADA, PLC or other software systems.
Advantech has combined the core functions of data acquisition, processing and publishing into a single I/O module to meet the needs of a wide range of industries, such as environmental monitoring, machine monitoring and smart cities.
The ADLINK EtherCAT solution consists of the Talos-3012 automation controller and EPS Series I/O and motion control system. The solution provides time-deterministic control of automatic processes.
Interworld Electronics has released the ETH-DIO Series 48-line ethernet digital I/O board. The series features 48 or 24 industrial-strength, high-current TTL digital I/O lines that can be remotely connected to any ethernet network.
The tET/tPET-PD2POR2 is an IP-based ethernet I/O monitoring and control module which can be remotely controlled through a 10/100 Mbps ethernet network using the Modbus TCP protocol. The product is suitable for integration with HMI, SCADA, PLC and other software systems.