Data acquisition & management > Ethernet

B&B Electronics Vlinx VESP211 form factor devices

07 March, 2012

B&B Electronics has expanded its family of ethernet serial servers with the Vlinx VESP211 series of small form factor devices.


M2M Connectivity RBE231 connectBlue ethernet port adapter

02 March, 2012

The connectBlue rugged Bluetooth ethernet port adapter RBE231 features Bluetooth 2.1+EDR and a communication range of up to 1000 m.


Exfo FTB-860G NetBlazer 10G ethernet tester

26 February, 2012

Available to rent, the Exfo FTB-860G NetBlazer 10G ethernet tester allows field technicians to perform RFC 2544 measurements and EtherSAM (ITU-T Y.156sam) for turnkey deployment, validation and troubleshooting of 10 Gbps access and metro ethernet services in any environment.


ORing RGPS-7084GP-P ethernet switch

10 February, 2012

ORing’s RGPS-7084GP-P industrial 12-port rackmount gigabit PoE ethernet switch is a managed redundant ring with 8x 10/100/1000Base-T(X) PSE ports and 4x 1000Base-X SFP ports. It provides IP-based bandwidth management which can control each IP device’s maximum bandwidth.


Renesas ethernet PHY chip range

31 January, 2012

Renesas has available two single-channel ethernet physical layer devices for industrial communications systems.


Hirschmann EAGLE20-0400/EAGLE30-0402 ethernet firewalls

27 January, 2012

Through Belden, Hirschmann has introduced the EAGLE20-0400 and EAGLE30-0402 firewalls that achieve greater link speeds. An extended number of ports enables users to deploy a single device instead of having to use multiple EAGLE20s.


IEI AFL-057A PoE all-in-one panel PC

24 November, 2011 by

The AFL-057A, a 5.7 power over ethernet all-in-one panel PC integrates the ultralow-power Intel Atom Z510/Z530 processor (up to 1.6 GHz), an LCD touch panel and PoE function into a compact, fanless form factor.


M2M Connectivity Raven XE ethernet gateway

22 November, 2011 by

The Raven XE is an intelligent 3G/NextG ethernet gateway/router providing high-speed connectivity in a compact robust design for enterprise applications.


ETM Pacific ETM350C ethernet router

21 October, 2011 by

A 3G ethernet router has been added to the range of 2G and 3G modems and SMS alarm and control devices from ETM Pacific.


Harting har-port service interface range

22 September, 2011 by

har-port is an addition to the range that offers service interfaces for ethernet and USB and makes control units and industrial computer interfaces accessible from the outside.


NSC Group ETX-203A network termination unit

30 April, 2011 by

NSC Group has released the ETX-203A carrier ethernet network termination unit.


ICP DAS WISE-7901 user-defined I/O expansion PoE module

24 March, 2011 by

The WISE-7901 user-defined I/O expansion PoE module from ICP DAS functions as a control unit for use in remote logic control and monitoring in various industrial applications. WISE (web inside, smart engine) offers a user-friendly and intuitive website interface that allows users to implement if-then-else control logic on controllers with just a few clicks - no programming required.


VTI Instruments 64-bit driver support

17 March, 2011 by

VTI Instruments has released full 64-bit driver support for the EX2500A LXI-VXI gigabit ethernet slot-0 interface, claimed to be the only forward-looking, backward-compatible solution enabling VXIbus systems to take advantage of the latest advances in instrumentation interface technology.


IEI IGPS-7084GP ethernet switch

15 November, 2010

IEI has released the IGPS-7084GP fully managed gigabit redundant ring PoE ethernet switch with 8 x 10/100/1000Base-T(X) ports, PoE (PSE) function and 4 x 1000Base-X SFP ports.


National Instruments CompactDAQ cDAQ-9188 modular data acquisition system

28 October, 2010

An ethernet-based CompactDAQ modular data acquisition system, which combines the ease of use and low cost of a data logger with the performance and flexibility of modular instrumentation, has been introduced.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd