Omnetics Connector right-angle micro circulars
09 November, 2011 byOmnetics Connector has added another tail termination to its micro circular product range. Micro circulars have previously been available in four barrel sizes 5, 12, 16 and 27 positions, with the tail terminations being soldercup, prewired and straight thru-hole versions.
Satcam through-hole connection system
09 November, 2011 byA method of achieving ‘plated-through’ holes without an electroplating system, permits quick and cost-effective conductivity of circuit board holes.
S-parameters are a sine of the future
09 November, 2011 by Dr Eric Bogatin and Dr Alan Blankman, LeCroy CorporationIf you work with high-speed serial links such as PCIe, USB, SATA, Infiniband or gigabit ethernet, you have encountered S-parameters. This method of describing the electrical properties of interconnects, standard in the microwave world for more than 60 years, is becoming the de facto standard in the high-speed digital world as well.
ODU Super Shorty short connector
12 October, 2011 byODU has developed an extremely short connector within the standard push-pull series ODU Mini-Snap.
GET Engineering MIL-STD-1397C converter systems
05 October, 2011 byConverter systems from GET Engineering transform MIL-STD-1397C parallel and serial data to standard TCP/IP ethernet protocol, effectively turning NTDS equipment into TCP/IP devices that meet NTDS latency standards.
Neutrik convertCON unisex 3-pole XLR connector
27 September, 2011 byNeutrik has developed the convertCON, said to be the world’s first unisex 3-pole XLR.
Canare BCP-B 75 Ω BNC connector range
27 September, 2011
by
Canare has released a range of 75 Ω BNC connectors designed to offer good 3 GHz performance.
Canare mini 75 ohms coax connector range
27 September, 2011 byCanare has announced a range of mini 75 Ω coax connectors designed to DIN 1.0/2.3 standard.
Neutrik etherCON series RJ45 connector system
27 September, 2011 byNeutrik’s etherCON series is a ruggedised and lockable RJ45 connector system designed to withstand the demands of professional audio and video network applications.
Harting Han Ground connector series
21 September, 2011 byHan Ground is a connector series that makes it possible to execute grounding systems in a pluggable design. The advantage is quick and error-free commissioning. Potential equalisation lines are still being permanently connected, however, which is relatively time-consuming and can be subject to errors. The latest single-pole connectors, in an IP 65 plastic housing, are designed for stranded wires from 10-35 mm2 and are optionally available in crimp or axial screw termination.
Features that affect power performance
16 September, 2011 by FCI Australia Pty LtdSystem power engineers have many choices in today’s power connector market and the list of options is growing as the industry diversifies to offer more specialised products. Here are some commonly asked questions:
Samtec SIR1 right-angle interface
15 August, 2011 byThe right-angle, one-piece interface is a board-to-board interconnect suitable for high shock/vibration applications. A reliable connection and the elimination of bent pins provide an interface with improved quality over elastomers and other pin and socket systems.
ERNI MiniMez board-to-cable connector
11 August, 2011 byERNI is expanding its 1.27 mm Blindmate connector system, MiniMez, with a board-to-cable solution. It uses the board-to-board MiniMez connectors with thick side walls to ensure polarised mating without the concern of housing wall breakage.
TE Connectivity PCB connectors
10 August, 2011 byTE Connectivity (TE), formerly Tyco Electronics, has released 0.25 mm pitch flexible printed circuit connectors (slantingly inserted FPC type).
Phoenix Contact low-profile double-level DFMC/DMC plug connector system
20 July, 2011 byThe low-profile double-level DFMC/DMC plug connector system allows up to 40 connections to be established in a small space.