Harting MicroTCA Backplane connector
22 April, 2011 byThe MicroTCA backplane connector has passed the ruggedised environmental test according to the draft specification MTCA.3. The PICMG standards organisation has announced the completion of the MicroTCA Conduction Cooled testing.
Harting DIN 41 612 type 2C/2R crimp female connector
21 April, 2011 byHarting has expanded its DIN 41 612 range with a DIN 41 612 type 2C/2R crimp female connector with a shell housing.
Omnetics Micro-D connector
05 April, 2011Omnetics Micro-D connectors for high-reliability aerospace, military, medical, optics, guidance systems, space and unmanned aerial vehicle (UAV) applications are available from nine to 51 contacts with termination types ranging from wire-to-wire, surface mount, solder cup, and thru-hole.
ODU ODU-MAC modular connector system
24 March, 2011 byThe ODU-MAC modular connector system from ODU is equipped with a range of combination possibilities and with particular modules such as customisable frames, plastic insulation bodies and removable crimp contacts for power, signal, coax, air couplings and fibre-optic connections.
Harwin circular connector family
24 March, 2011 byHarwin, the hi-rel connector and SMT board hardware manufacturer, says that users of its C90 industrial range of circular connectors have available 360° EMC screening via a new series of screening braid adapters.
FibreExpress@Ease fibre patch panel
08 March, 2011 byA fibre patch panel in the FiberExpress family is designed for a wide range of installations.
Conxall Mil-E-Qual earth pin connector
21 February, 2011 byThe first mate last break connector is suitable for many applications as many alternative energy applications and others need to ensure they are grounded when they first plug in the connector.
Lumberg Automation Profibus DP connector range
11 February, 2011 byBelden has extended its range of Lumberg Automation products to include new Profibus DP connectors that have a D-sub and M12 interface, and are offered with 35, 90 or 180° cable outlets.
Lumberg Automation eight-pole connector range
20 December, 2010 byBelden has extended its Lumberg Automation range with what is claimed to be the world’s first eight-pole M8 actuator/sensor connectors. They fulfil all requirements for shock and vibration resistance and are being offered in two variants with moulded cables as well as in three field-attachable installation variants.
Switchcraft E and EH series wall plates
03 November, 2010 byThe E and EH series of wall plates from Switchcraft is suitable for custom connector configurations on standard-size wall plates. Options include single and double gang with zero, one, two and four connector holes.
Keystone Electronics micro-USB interconnects
12 October, 2010 byA series of micro-USB plugs and sockets with up to 4.8 Gbps data transfer speeds is now available from Keystone Electronics Corp.
National Semiconductor PowerWise LMH0394 SDI cable equaliser
08 October, 2010 byThe PowerWise LMH0394 serial digital interface cable equaliser from National Semiconductor is claimed to extend the reach of broadcast video signals by 40% (200 m at 3 Gbps) while delivering half the power (115 mW typical) of other equalisers.
Belden 50 Ω N connectors
08 October, 2010
by
Belden has unveiled a range of 50 Ω N connectors for a wide range of RF transmission applications.
Belden F, BNC and RCA compression connector and tool range
17 September, 2010 byA range of F, BNC and RCA compression connectors and tools, along with the availability of both standard or custom-configured cable assemblies, has been introduced. When used in combination with coaxial cable, they provide reliable signal performance and easy installation.
Omnetics nano series of circular connectors
16 August, 2010 byThe Omnetics nano series of circular connectors is available in a breakaway configuration. The devices are said to be the smallest Mil-Quality circulars available and can withstand high shock and vibrations while maintaining their electrical integrity. The breakaway feature is suitable for applications where size and ruggedness are needed.
