Network Technologies XTENDEX ST-2FOHDMI-SC50 optical fibre HDMI extender
29 April, 2014 | Supplied by: Interworld Electronics and Computer IndustriesThe Network Technologies XTENDEX ST-2FOHDMI-SC50 optical fibre HDMI extender can extend HDMI signals up to 300 m using two-stranded multimode SC fibre-optic cables. Two extenders can be cascaded to reach up to 600 m.
RF connectors explained
11 April, 2014 by Mike Smyth, specialist technical writerRF coaxial connectors have been around for so long that their beginnings are lost in the mists of time. Most people, however, are familiar with the traditional 50 Ω coax plug that went into the back of the family television set.
TE Connectivity Cloudsplitter connector system
29 March, 2014 | Supplied by: CommscopeTE Connectivity's Cloudsplitter connector system delivers Cat5e data performance and up to 250 W of DC power in a single cable, integrating eight signal and two power positions to provide a compact single solution that helps standardise inventory.
HARTING Han HighTemp Series high-temperature connectors
28 March, 2014 | Supplied by: HARTING Pty LtdHARTING's high-temperature connector family, the Han HighTemp Series, enables the reliable transmission of signals and power at temperatures up to 200°C in industrial environments.
Wavelex WHC0727A hybrid coupler
18 March, 2014 | Supplied by: Wireless ComponentsWavelex has released its 0.7-2.7 GHz, 10 W hybrid coupler. The SMA-connectorised, 90° WHC0727A hybrid coupler features a low insertion loss of 0.5 dB (typical), high isolation of 18 dB (minimum) and good VSWR.
Phase 3 Powersafe connector series
28 February, 2014 | Supplied by: Connector-Tech ALS Pty LtdThe Phase 3 Powersafe connector series offers good ingress protection. The sequential mating box is IP54-rated before the Powersafe connectors - which are IP67-rated - are installed. Once the connectors are installed, the complete assembly is IP67-rated. If an IP67 rating is required to withstand exposure to wet conditions at all times, Phase 3 recommends surrounding the sequential mating box with an IP-rated electrical enclosure.
Molex Plastic Substrate Interconnect
07 February, 2014 | Supplied by: Molex Premise Networks Pty LtdMolex's Plastic Substrate Interconnect (PSI) provides a low-profile interconnect solution for the solid-state lighting industry when used with an integrated Pico-EZmate header in select LED arrays. The product delivers power while providing a simple and reliable solderless connection to LED CoB arrays for lighting applications.
Schurter 2576 and 2578 cord retaining system for IEC C8 appliance inlets
29 January, 2014 | Supplied by: SCHURTER (S) PTE LTDV-Lock, wire-bail and clamp systems have proven successful in preventing the accidental disconnection of power cords from inlets according to IEC 60320. However, these systems are only available for C14 and C20 appliance inlets. Schurter has developed a cord retention system with specially adapted retaining clips for C8 type inlets. The clips fit the company’ series 2576 flange mount and 2578 snap-in mount inlets.
TE Connectivity passives
08 January, 2014 | Supplied by: http://sg.element14.com/te-connectivityelement14 is stocking TE Connectivity passives, comprising power, precision and thick film resistors for applications in power supplies, industrial, instrumentation, automation and control. The portfolio of over 13,500 products includes 3000 recent products such as resistors, potentiometers, filters for EMC/RFI suppression and inductors.
Schurter 5707 and 6100 connectors with seal kits
16 December, 2013 | Supplied by: SCHURTER (S) PTE LTDSchurter now offers two connector types - 6100 and 5707 - in a version with a sealing kit which guarantees IP54 protection to the cord connectors. The Power Entry Module 5707 contains an IEC style C14 or C18 appliance inlet, one- or two-pole fuse holders and a standard or medical line filter.
Samtec Razor Beam LP product line expanded
11 October, 2013 | Supplied by: Samtec ANZSamtec has expanded its Razor Beam LP product line to include an ultrafine-pitch, low-profile system for applications where space is limited and high-speed performance is required.
Conduit clamps and cable brackets
02 October, 2013 | Supplied by: SWIFT Metal Services Pty LtdAnchorage Group’s conduit clamps, cable clips and saddles are manufactured from a variety of materials to suit most application. The group produces copper saddles, stainless steel saddles and galvanised saddles of varying thicknesses for light duty through to extreme environments.
Smart devices shake up the connector world
30 August, 2013 by Bob Hult, Bishop & Associates IncMobile devices, including smartphones and tablets, have become a disruptive technology that is shaking up the norms of system architecture. Traditional methods of introducing power and managing I/O are undergoing changes that are having major implications for traditional connectors. Read on to find out how.
Anderson Power Products Spec Pak mini 3-pole connector
08 August, 2013 | Supplied by: Soanar LimitedThe Spec Pak mini 3-pole connector, from Anderson Power Products, is a small, IP68, sealed connector UL rated to carry up to 22 A per contact at 600 V.
Multitest ecoAmp high-power contactor
14 June, 2013 | Supplied by: MultitestThe ecoAmp high-power Kelvin contactor is a solution for high-power applications of 1000+ amperes. All typical packages and modules for power applications are covered by the ecoAmp, including MOSFETs, drivers, IGBTs, power modules and power packages such as TO, SO and DIP.
