Fluke TL175 TwistGuard test lead range
28 May, 2011 | Supplied by: Fluke Australia Pty Ltd
Fluke has available the TL175 TwistGuard test leads, claimed to be the only leads with a manually adjustable test tip guard for use in changing measurement situations.
Jaycar retractable USB multi-charger kit
24 May, 2011 | Supplied by: Jaycar Electronics Pty Ltd
The USB multi-charger kit charges a multitude of different phone or media player devices from any USB port and eliminate the need for a mains-powered adapter.
Harwin Datamate shielded connectors
10 May, 2011 | Supplied by: Clarke & Severn Electronic Solutions
Harwin says its 2 mm Datamate hi-rel connector family is now available with single-piece, machined metal backshells that provide electrical screening against RFI and EMI interference.
Clarke & Severn webshop range extended
10 May, 2011 | Supplied by: Clarke & Severn Electronic Solutions
Clarke & Severn has expanded the range of products available online via its webshop www.cseonline.com.au
Flex data link ZHDL2/ZHR5 data link and socket range
22 April, 2011 | Supplied by: Samtec ANZ
Flex data link (ZHDL2 series) and socket (ZHR5 series) system is for high-speed and rugged cable-to-board applications where signal integrity matters.
Dominion G20 high-density connector
22 April, 2011 | Supplied by: Dominion Electronics
CompactPCI serial PICMG CPCI-S.0 is a new, independent base standard that introduces a connector, which enables a much higher signal density and supports even higher transmission frequencies of 12 Gbps and more.
AFC Group pre-terminated loose tube cable assembly range
20 April, 2011 | Supplied by: AFL Telecommunications Pty Ltd
A range of pre-terminated loose tube cable assemblies, now has up to 48 fibres, and can be made to virtually any length and connector combination.
AFC MTP cabling system
15 March, 2011 | Supplied by: AFL Telecommunications Pty Ltd
AFC’s third-generation MTP cabling solution offers density and low link loss performance while providing an upgrade to 40 and 100 Gigabit circuits.
FibreExpress@Ease fibre patch panel
08 March, 2011 | Supplied by: Belden Australia Pty Ltd
A fibre patch panel in the FiberExpress family is designed for a wide range of installations.
Lumberg Automation Profibus DP connector range
11 February, 2011 | Supplied by: Belden Australia Pty Ltd
Belden has extended its range of Lumberg Automation products to include new Profibus DP connectors that have a D-sub and M12 interface, and are offered with 35, 90 or 180° cable outlets.
Samtec PowerStrip MPSS series wire cable system
17 January, 2011 | Supplied by: Samtec ANZ
Samtec’s latest high-performance power interconnect solution is a discrete wire cable system for space-limited applications. The PowerStrip/15 cable assembly (MPSS series) is available with two, three, four, six or eight dual leaf blade contacts on a 5 mm centreline.
Lumberg Automation eight-pole connector range
20 December, 2010 | Supplied by: Belden Australia Pty Ltd
Belden has extended its Lumberg Automation range with what is claimed to be the world’s first eight-pole M8 actuator/sensor connectors. They fulfil all requirements for shock and vibration resistance and are being offered in two variants with moulded cables as well as in three field-attachable installation variants.
Keystone Electronics micro-USB interconnects
12 October, 2010 | Supplied by: NPA Pty Ltd
A series of micro-USB plugs and sockets with up to 4.8 Gbps data transfer speeds is now available from Keystone Electronics Corp.
National Semiconductor PowerWise LMH0394 SDI cable equaliser
08 October, 2010 | Supplied by: Arrow Electronics Australia Pty Ltd
The PowerWise LMH0394 serial digital interface cable equaliser from National Semiconductor is claimed to extend the reach of broadcast video signals by 40% (200 m at 3 Gbps) while delivering half the power (115 mW typical) of other equalisers.
Belden 50 Ω N connectors
08 October, 2010
|
Supplied by:
Belden Australia Pty Ltd
Belden has unveiled a range of 50 Ω N connectors for a wide range of RF transmission applications.
