Plugs, cables & interconnects

PCB connector

27 April, 2009 | Supplied by: Amphenol Australia Pty Ltd

With the Smash connector range, Amphenol provides a reliable solution for SEM form E factor modules.


Unregulated adapters

24 April, 2009 | Supplied by: Braemac Pty Ltd

Phihong has released an extended range of unregulated switching adapters.


Universal adapter

24 April, 2009 | Supplied by: Braemac Pty Ltd

Phihong has expanded its adapter range with an 18 W, 3-wire input 48 VDC output version.


Specialised connectors

17 April, 2009 | Supplied by: Clarke & Severn Electronics

ODU connectors for magnetic resonance tomograph devices provide between 30,000 and 60,000 mating cycles through the contacts in the spring wire system.


Light-guided connection

17 April, 2009 | Supplied by: Cable Check

Cami Research has introduced a computer-assisted technique for assembling circular connectors used in aerospace and other high-reliability applications.


Moulded cordsets

17 April, 2009 | Supplied by: Turck Australia Pty Ltd

Turck can now mould its 6- and 8-pin M23 powerfast connectors.


Sealed receptacles

17 April, 2009 | Supplied by: Samtec ANZ

Samtec has expanded its IP68-rated AccliMate Sealed Circular Cable Plus and Receptacle systems with the addition of size 10 shell versions of its Power, High Density and Tiger Eye sealed circulars.


USB 2.0 connections

17 April, 2009 | Supplied by: Amphenol Australia Pty Ltd

Amphenol has released its first full range of USB 2.0 connections for harsh environments. The USB A connectors have now been joined by USB B cables and connectors (to link up peripherals).


Fibreglass sleeving

17 April, 2009 | Supplied by: Altronic Distributors Pty Ltd

Altronic Distributors now supplies fibreglass cable sheathing for use in industrial and motor vehicle applications.


Enhanced DIN connectors

17 April, 2009 | Supplied by: ERNTEC Pty Ltd

Erni Electronics has redesigned its right-angle female DIN connectors for daughter card applications.


Amphenol 451/PT connector range

17 April, 2009 | Supplied by: Amphenol Australia Pty Ltd

The Amphenol 451/PT connector range has been renewed and the latest series incorporates the SNAP-CAP technique which protects the receptacle when the male connector is not present.


Thermal connectors

17 April, 2009 | Supplied by: Clarke & Severn Electronics

Recording temperatures plays an increasingly important role in engineering and high-precision temperature probes and evaluation devices are used.


Steel cable conduits

17 April, 2009 | Supplied by: EC&M Electrical Pty Ltd

Ramflex Micro Conduit to protect cables and optical fibres is produced from continuous stainless steel strip, to form the flexible conduits that are supplied on a range of sizes from 3.5 to 12.7 mm ID.


Plug adapter

17 April, 2009 | Supplied by: Braemac Pty Ltd

Phihong has expanded its adapter range with an 8 W version featuring interchangeable interface plugs and a micro-USB output connector.


Board-to-board adapter

17 April, 2009 | Supplied by: ERNTEC Pty Ltd

The latest SMC board-to-board adapter from Erni Electronics adds to the SMC 1.27 mm pitch connector range offering flexibility in its board-to-board heights from 20 to 40 mm in 2 mm increments.


  • All content Copyright © 2022 Westwick-Farrow Pty Ltd