Creative Materials 129-06 conductive ink, adhesive and coating
18 October, 2021 | Supplied by: Creative Materials Inc129-06 has low hysteresis, high flexibility and strong adhesion to a wide variety of substrates, including most metals and plastics as well as silicones.
'Anti-short layer' helps to prevent Li-ion battery fires
15 October, 2021Materials scientists have found a way to prevent internal short circuits, the main cause of fires in lithium-ion (Li-ion) batteries.
Dow DOWSIL CC-2588 Conformal Coating
06 October, 2021 | Supplied by: Dow Chemicals Australia LtdDow's DOWSIL CC-2588 Conformal Coating is a tough, abrasion-resistant, silicone-based material that protects printed circuit boards (PCBs) and electronic components against high humidity and corrosion.
Bulgin fuse holders
24 September, 2021 | Supplied by: Transfer Multisort Elektronik Sp. z o.o.Bulgin fuse holders are designed to provide the high level of protection required in today's sophisticated electronic equipment.
Protective shells developed for silver nanowires
20 August, 2021US and Chinese scientists have found a way to improve the longevity of silver nanowires to enhance their capabilities in electronic devices.
Conquer Electronic miniature fuses
11 August, 2021 | Supplied by: Transfer Multisort Elektronik Sp. z o.o.Conquer Electronic's miniature fuses are useful for overcurrent protection of printed circuit boards with limited space.
SCHURTER FMBD EP EMC filter
09 August, 2021 | Supplied by: SCHURTER (S) PTE LTDThe FMBD EP is SCHURTER's flagship double-stage filter series for three phases with neutral line systems, available in variants with high nominal voltages.
Two steps closer to attack-proof quantum communication
04 August, 2021Researchers have developed two methods to ensure that quantum key distribution (QKD) communications cannot be attacked.
Polyurethane resin protects IoT RF sensors
29 July, 2021 | Supplied by: ElectrolubeTo facilitate efficient use in a broad mix of end-use environments, sensors need to be protected to ensure ongoing performance.
Creative Materials 111-27 dielectric coating and encapsulant
12 July, 2021 | Supplied by: Creative Materials IncCreative Materials introduces 111-27 — an electrically insulating, thermally curing, colourless coating and encapsulant that can be applied by many different methods.
Electrolube GF400 thermal gap filler
06 July, 2021 | Supplied by: HK Wentworth Pty LimitedGF400 is a two-part, liquid silicone-based gap filler, which can either be cured at room temperature or accelerated with heat.
Chase Humiseal UV20GEL staking and vibration protection UV gel
30 June, 2021 | Supplied by: Onboard SolutionsChase's Humiseal UV20GEL is a fast-curing, non-sag thixotropic paste, which cures to give a flexible urethane acrylate that bonds well to engineered plastics and metal-based substrates.
Microchip Technology DesignShield tool for bitstream protection
18 June, 2021 | Supplied by: Microchip Technology AustraliaThe tool was created to protect developers of aerospace, defence and other high-assurance systems from cybercriminals trying to acquire an FPGA's bitstream from the fielded system.
Electrolube launches video series for its conformal coatings
03 June, 2021 | Supplied by: ElectrolubeElectrolube has announced a series of how-to videos to demonstrate how simple it is to accommodate its two-part coating system into existing dispensing systems.
Conformal coatings: challenges and considerations 101
01 June, 2021 | Supplied by: Hawker RichardsonConformal coating has become an integral part of the PCB production process for some manufacturers, but it doesn't come without its challenges.
