Gamry Interface 1000 potentiostat
03 March, 2014 | Supplied by: Scientific Solutions Pty LtdThe Interface 1000 is a potentiostat/galvanostat/ZRA for use in general electrochemistry applications. It is suitable for corrosion measurements, battery testing, sensor development and physical electrochemistry. The product features nine current ranges and three gain stages, and covers everything from corrosion to batteries and sensors to supercaps. It has a full 1 A of current up to the compliance limit of ±20 V.
Agilent Technologies E5063A ENA Series network analyser for testing simple RF passive components
28 February, 2014 | Supplied by: Keysight Technologies Australia Pty LtdAgilent Technologies has announced the E5063A ENA Series network analyser. The instrument offers optimised performance and functionality for testing simple RF passive components, such as handset/BTS antennas, RF cables and filters. The product provides high RF performance, including trace noise of 0.002 dBrms and stability of 0.01 dB/°C. This helps reduce test cost without sacrificing quality.
Network Technologies ENVIROMUX-5D environmental monitoring system
26 February, 2014 | Supplied by: Interworld Electronics and Computer IndustriesThe ENVIROMUX-5D uses sensors to monitor critical environmental and security conditions. When an environmental sensor goes out of range of a configurable threshold or a security sensor is triggered, system administrators will be notified.
Erntec 3890 CR DC micromotors
13 February, 2014 | Supplied by: ERNTEC Pty LtdThe 3890 CR series from Erntec is based on the motor concept of the CR DC micromotors series with graphite commutation from Faulhaber.
Olympus IPLEX RX and IPLEX RT industrial videoscopes
13 December, 2013 | Supplied by: Olympus Australia Pty LtdOlympus has introduced the IPLEX RX and IPLEX RT industrial videoscopes. The products provide good image quality and have a compact and robust design. They are suitable for inspectors looking for image reproduction in difficult applications.
Michell Optidew chilled mirror hygrometer
12 December, 2013 | Supplied by: AMS Instrumentation & Calibration Pty LtdMichell's Optidew Chilled Mirror Hygrometer meets the Code of Federal Regulations for Engine Testing - an essential requirement for any instrument used for emissions testing in the US and many other regions.
Device to detect electromagnetic attacks
05 December, 2013Scientists at the Fraunhofer Institute for Technological Trend Analysis INT, in Euskirchen, Germany, are researching how to detect 'attacks' from electromagnetic fields. Electromagnetic pulses can interfere with or damage electronic devices but, since electromagnetic radiation is invisible, those affected by it do not know why their machines break down.
Bestech Endevco 727 lightweight piezoresistive accelerometer
16 November, 2013 | Supplied by: Bestech Australia Pty LtdBestech Australia introduces the lightweight piezoresistive accelerometer Endevco 727, designed for accurate shock measurement during drop testing of consumer electronic devices among other shock and impact testing environments. Ranging from 2000 up to 60,000 g, the product can measure shocks in g ranges well above current drop test sensors. It is designed to be mounted with adhesive.
Tektronix TBS1064 Oscilloscope
29 October, 2013 | Supplied by: element14Tektronix now offers the TBS1064 digital storage oscilloscope. The product provides good performance in a compact design that includes many features.
GTC MM-TA500 multisystem ignition analyser
14 October, 2013 | Supplied by: Durst Motor & Electric Industries Pty LtdThe GTC MM-TA500 multisystem ignition analyser is suitable for automobile, industrial, aviation, agricultural and marine applications. The simple-to-use tachometer requires no special adapters, cables or a scope.
Tektronix TBS1000 series digital storage oscilloscopes
11 October, 2013 | Supplied by: TekMark Australia Pty LtdThe Tektronix TBS1000 series digital storage oscilloscopes come with 4-channel models to deliver digital real-time sampling, pass/fail testing and easy-to-use controls.
Network Technologies ENVIROMUX-5D-IND environmental monitoring system
23 September, 2013 | Supplied by: Interworld Electronics and Computer IndustriesNetwork Technologies has added the ENVIROMUX-5D-IND high-temperature industrial environmental monitor to its medium-sized advanced server environment monitoring system range. The ENVIROMUX-5D-IND extends the temperature sensor range to cover 0 to 80°C.
Rohde & Schwarz GNSS simulator
08 August, 2013 | Supplied by: Rohde & Schwarz (Australia) Pty LtdThe global navigation satellite system (GNSS) simulator runs on the R&S SMBV100A vector signal generator. The simulator is suitable for developers who have to perform extensive tests on the receivers and components used in satellite-based navigation systems.
Benstone Instruments’ Impaq Elite portable, 4-channel real-time analyser
31 July, 2013 | Supplied by: Scientific Devices AustraliaThe Impaq Elite noise and vibration analyser is designed for operation optimisation, maintenance and design of industrial machinery in mining, power generation, aerospace, marine and ground transportation.
Luthi coupling networks
31 July, 2013 | Supplied by: Consultant Technology Australia Pty LtdLüthi has a wide selection of appropriate coupling/decoupling networks (CDNs), EMC measuring clamps and accessories for conducted immunity testing and emission measurement.
