Keystone Electronics miniature SMT test point

Agilent Technologies software for DCA-X oscilloscope

Agilent Technologies has two test applications that leverage the high bandwidth and low jitter performance of the Infiniium 86100D DCA-X oscilloscope.

Agilent Technologies N2750A Series InfiniiMode active differential probes

Agilent Technologies has introduced InfiniiMode differential probes, a generation of low-cost, 1.5, 3.5 and 6 GHz differential active probes for general-purpose, high-speed differential probing.

Rohde & Schwarz RTO digital oscilloscope software option

Developers of microcontrollers, audio components and audio equipment can use a software option for the R&S RTO digital oscilloscope to thoroughly analyse all audio interfaces.

Hioki CT6590 clamp-on sensor for AC/DC clamps

The Hioki CT6590 clamp-on sensor for AC/DC clamps allows measurement of AC and DC currents to 2000 A as pure AC, pure DC, half-wave and full-wave rectified currents on a range of Hioki instruments.

Aeroflex IFR 3500A radio communications test set

The Aeroflex IFR 3500A radio communications test set can be rented from TechRentals.

Fluke Calibration 7526A Precision Process Calibrator

Fluke Calibration has introduced the 7526A Precision Process Calibrator, a single benchtop calibrator.

Fluke CNX Wireless System

The Fluke CNX Wireless System simplifies troubleshooting by enabling up to 10 simultaneous electrical and temperature wireless measurements.

Narda Industrial Field Meters NIM-511 and NIM-513

The Narda Industrial Field Meters NIM-511 and NIM-513 measure radiation emitted by equipment that uses industrial frequencies.

Dytran model 3220M27 IEPE accelerometer

The Dytran model 3220M27 is a low-profile, ring-shaped IEPE accelerometer with an overall weight of just 2.7 g.

Flash testing of PCBs during the initial production stages

PCB manufacturers can take advantage of a fast, reliable and safe solution to meet the growing demand for flash/HIPOT tested (2 kV) unpopulated boards. Electrical safety testing specialist Clare has developed a bespoke system using its HAL104 instrument connected to a test enclosure, which enables the easy flash testing of PCBs during the initial production stages.

Michell Instruments DT722 RH and temperature transmitter

Maintaining reliable relative humidity (RH) measurements in harsh or corrosive environments is notoriously difficult as the conditions themselves degrade the sensors and equipment, often in short time periods. Michell Instruments’ DT722 RH and temperature transmitter provides a solution to this problem.

EM TEST CWS 500N4 conducted common mode testing for electricity meters

The EM TEST CWS 500N4 comes in a compact single-box design and is designed to test for EMC immunity to conducted, common mode disturbances in the frequency range 0 Hz (DC) to 165 kHz. Such test requirements are specified in IEC 61000-4-16 and cover continuous mode testing as well as short-term testing with DC, 16 2/3 Hz, 50 Hz and 60 Hz with four test levels each and a sweep mode from 10 Hz to 165 kHz.

Power Parameters UNI-T handheld digital oscilloscope and multimeter

Fluke CNX Wireless System

The Fluke CNX Wireless System is a set of test tools that wirelessly connect multiple measurement modules and send simultaneous readings to a master device up to 20 m away. The rugged, customisable tool set lets users choose various measurement modules based on their specific troubleshooting scenario. It simplifies troubleshooting by enabling up to 10 simultaneous electrical and temperature wireless measurements.