Test & measure

Power Parameters UNI-T 528 appliance tester

01 August, 2012 | Supplied by: Power Parameters Pty Ltd

The UNI-T 528 appliance tester provides insulation, earth continuity and resistance, appliance cord tests and line voltage testing (line to earth, neutral to earth and line to neutral).


Fluke FTK1000 multimode fibre-optic light source

26 July, 2012 | Supplied by: TechRentals

The FTK1000 multimode fibre optic light source, combined with the SimpliFiber Pro power meter, measures power and loss across a fibre optic network using the dual-wavelength testing feature.


Simplifying frequency converter testing

18 July, 2012 by David Ballo, Agilent Technologies | Supplied by: Keysight Technologies Australia Pty Ltd

Traditionally, VNAs have been used to characterise the magnitude and phase performance of a mixer or frequency converter. This article features a test method that fully characterises mixers and frequency converters without reference and calibration mixers.


Agilent X-series oscilloscope range

16 July, 2012 | Supplied by: Keysight Technologies Australia Pty Ltd

Agilent Technologies continues to expand the capability of its X-series of oscilloscopes by offering 1 GHz models for the growing need for higher-bandwidth bench scopes.


Fluke 199 200 MHz ScopeMeter oscilloscope

16 July, 2012 | Supplied by: TechRentals

The Fluke 199 200 MHz ScopeMeter is a handheld, battery-powered oscilloscope with up to a 200 MHz bandwidth, a memory of 27,500 points per input and 2.5 GS/s real-time sampling. This instrument is 1000 V CAT II and 600 V CAT III safety certified.


Anritsu Site Master S331L cable and antenna analyser

16 July, 2012 | Supplied by: Anritsu Pty Ltd

The Site Master S331L cable and antenna analyser is a sweep tool with 8 h continuous battery life and covers the range 2 MHz to 4 GHz. It shows return loss, cable loss and distance-to-fault measurements.


Oscium iOS test equipment range

13 July, 2012 | Supplied by: Emona Instruments Pty Ltd

Oscium iOS test equipment takes advantage of the features and touch-screen technology of the iPad, iPhone and iPod touch, and interfaces via the iOS family’s 30-pin dock connector to create a new category of test equipment called iOS Test.


Tektronix oscilloscope with a built-in spectrum analyser

13 July, 2012 | Supplied by: TekMark Australia Pty Ltd

Tektronix is introducing what it claims is the first oscilloscope with a built-in spectrum analyser. The mixed domain instrument can capture time-correlated analog, digital and RF signals for a complete system view of a device.


Rohde & Schwarz RTO oscilloscope range

12 July, 2012 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

The Rohde & Schwarz RTO oscilloscopes are claimed to detect and analyse faster than conventional scopes. The digital trigger system delivers good accuracy and the intelligent operating concept and touch screen make it fun to use.


LeCroy WaveAce 1000/2000 oscilloscope range

10 July, 2012 | Supplied by: Vicom Australia Pty Ltd

Vicom will feature oscilloscopes from LeCroy. The WaveAce 1000 has a sample rate of up to 1 GS/s with 2 Mpts of memory in 2-channel models from 40 to 100 MHz.


Agilent M9703A high-speed digitiser

29 June, 2012 | Supplied by: Keysight Technologies Australia Pty Ltd

The high-speed M9703A digitiser, the 8-channel, 12-bit digitiser that complies with the AXIe open standard, is designed for use in large-scale applied physics applications.


IEEE capability for analysers

25 June, 2012

Aeroflex has added IEEE 802.11 ac capability to its S-series of RF signal generators and analysers.


Agilent 1000B series oscilloscope range

12 June, 2012 | Supplied by: Keysight Technologies Australia Pty Ltd

The 1000B series of oscilloscopes consists of four two-channel models, with bandwidths from 50 to 150 MHz.


Agilent DMM remote monitoring

08 June, 2012 | Supplied by: Keysight Technologies Australia Pty Ltd

A wireless connectivity solution that links up to three Agilent handheld digital multimeters to smartphones, tablets and PCs enables remote viewing and control from up to 10 m.


When components need to keep their cool

31 May, 2012 by Gino DiBartolomeo - CEO, Environmental Stress Systems, Inc | Supplied by: Environmental Stress Systems

This article looks at some of the various methods of heating and cooling a DUT.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd