Assembly > Solder

Thermaltronics TMT-R8000S soldering robot

23 April, 2024

The Thermaltronics TMT-R8000S soldering robot is designed to meet the requirements of high-speed operation, repeatability and durability.


JBC CD Compact Soldering Stations version F

25 June, 2021

JBC has upgraded its CD Compact Soldering Stations. The more compact and intuitive restyled compact stations (version F) provide a range of additional features to improve on an already versatile station.


Nordson EFD 70 cc Optimum syringe barrels

23 March, 2021

Nordson EFD has introduced the largest sized syringe barrel in its Optimum dispensing components line.


The reflow process: convection versus vapour phase

01 September, 2020

Two of the main technologies deployed on the shop floor are based on either convection or vapour phase technology. In this article we look at both.


Metcal GT90 and GT120 soldering systems

21 May, 2020

Metcal's GT90 and GT120 soldering systems offer a combination of inductive heating technology with adjustable temperature.


How to optimise solder stencil aperture to increase connector options

14 January, 2020 by David Decker*

Designers of high-density electronics systems can now match 0.15 mm co-planarity connectors with 0.10 mm-thick solder stencils through careful aperture design.


Essential approaches for SMT assembly process control

09 May, 2019

Effective process control is helpful in finding out any issue that may stop assembly manufacturing from smoothly running and minimising the failure rate of products.


Mixing instructions for epoxy resin

23 April, 2019

This video provides instructions for the mixing of epoxy resins.


Kurtz Ersa VERSAFLOW 4XL selective soldering system

21 February, 2019

The VERSAFLOW 4XL selective soldering system, from Kurtz Ersa, provides good flexibility and application variety with a high level of soldering quality.


Ersa i-CON 1V and i-CON 2V soldering and desoldering stations

13 July, 2018

Together, Ersa's i-CON 1V and 2V control units are able to drive eight different soldering tools.


Nordson SELECT selective soldering systems

13 July, 2018

The Nordson SELECT range of selective soldering systems caters for different requirements from low to high volume.


Interflux Electronics LMPA-Q low melting point alloys

12 July, 2018

Interflux Electronics' LMPA-Q range of low melting point alloys (LMPAs) is designed to allow users to use soldering temperatures that are lower than for traditional lead-free Sn(Ag)Cu (SAC) alloys.


INVENTEC ECOREL FREE 305-16LVD solder paste

12 July, 2018

ECOREL FREE 305-16LVD is a no-clean, lead-free solder paste developed with the chemistry of the ECOREL solder paste range. The product is suitable for standard convection reflow and vapour phase soldering.


DFA VP-Jumbo condensation reflow soldering machine

05 July, 2018

The DFA VP-Jumbo soldering solution has been specifically designed for reflow soldering in laboratory and prototype environments.


Altronic Distributors T 2460A lead-free touchscreen soldering station

05 July, 2018

Altronic Distributors has introduced the T 2460A high-power, temperature-controlled soldering station with touch screen. The soldering station incorporates a special intelligent microchip control design.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd