Qorvo TQP9111 1.8–2.7 GHz 2 W power amplifier
18 February, 2016The Qorvo TQP9111 1.8–2.7 GHz 2 W power amplifier is a high-efficiency, two-stage driver amplifier in a surface-mount package. The product can achieve high performance with 46 dBm OIP3 and 32 dBm P1dB.
Wolfspeed CGD15FB45P1 SiC MOSFET driver
05 February, 2016Wolfspeed has announced a silicon carbide MOSFET driver, the CGD15FB45P1, featuring six output channels, an isolated power supply, a direct-mount low inductance design, short-circuit protection, and overtemperature and undervoltage protection.
ANADIGICS AWL5911 power amplifier
22 January, 2016ANADIGICS has released the AWL5911 power amplifier, an easy-to-use module that delivers high levels of linearity and efficiency for high data rate applications. Designed for the 5 GHz WLAN standards, it supports IEEE 802.11a/n/ac applications.
MACOM MAAP-011140-DIE power amplifier
28 September, 2015The MAAP-011140-DIE is a four-stage, 6 W power amplifier in bare die form that is fabricated using a GaAs pHEMT device process featuring full passivation. The power amplifier operates from 27.5 to 30 GHz and provides 24 dB of linear gain, 6 W saturated output power and 23% power-added efficiency.
Spectrum pre-amplifiers
01 September, 2015For applications where low-level electronic signals need to be analysed, Spectrum pre-amplifiers can be used to boost signal levels. Seven different versions are available, offering gain ranges from 20 to 60 dB, bandwidths from 10 MHz to 2 GHz, and 50 Ω and 1 MΩ terminations.
MACOM MAAP-011145 power amplifier
14 August, 2015The MACOM MAAP-011145 power amplifier is assembled in a 7 mm surface-mount, lead-free cavity package with a temperature-compensated integrated power detector operating from 17.65 to 19.75 GHz.
Sonion M20 dual microphone with shared rear volume
12 June, 2015Sonion introduces a dual microphone with shared rear volume in one package: the M20.
MACOM MAAP-011022 S-band 7 W pulsed high-power amplifier
05 May, 2015The MACOM MAAP-011022 high-power balanced amplifier operates from 2.7 to 3 GHz, provides 7 W of pulsed power and is designed to operate at an 8% duty cycle.
MACOM MAAP-011139-DIE power amplifier
04 April, 2015Developed by MACOM, the MAAP-011139-DIE is a four-stage, 4 W power amplifier that operates from 29 to 31 GHz and provides 24 dB of linear gain (@ 30 GHz), 4 W saturated output power and 23% efficiency while biased at 6 V.
TriQuint TGA2583-SM and TGA2585-SM GaN power amplifiers
11 December, 2014TriQuint has released two 2.7 to 3.7 GHz packaged GaN power amplifiers. The TGA2583-SM and TGA2585-SM are available in surface-mount, 32-lead, 5 x 5 mm AIN QFN packages.
Rockwell Automation Allen-Bradley Kinetix 5500 servo drive with integrated safety
13 November, 2014The Allen-Bradley Kinetix 5500 servo drive with integrated safety can help machine builders take advantage of a single EtherNet/IP network, as well as a common design environment with Rockwell Software Studio 5000 Logix Designer software.
Mini-Circuits GVA-123+ ultra-wideband monolithic amplifier
12 November, 2014Mini-Circuits' GVA-123+ monolithic amplifier covers an ultra-wide frequency range of 0.01 to 12 GHz. The product supports a wide range of applications, including LTE, WiMAX, satellite communications, X-band radar, point-to-point radio and avionics systems.
Mini-Circuits MGVA-63+ dual-matched MMIC amplifier
21 October, 2014Mini-Circuits' MGVA-63+ dual-matched MMIC amplifier covers the 40 MHz to 3 GHz band with IP2 performance of +68.4 dBm, providing the suppression of unwanted second harmonics in wideband applications.
Wavelex WPA09-35B and WPA09-53A 24 W power amplifiers
30 September, 2014Wavelex has released two 24 W Psat (20 W P1dB) power amplifiers. The 50 Ω PAs operate from 925 to 960 GHz and offer high gain, low gain flatness and high power added efficiency.
M/A-COM Technology Solutions MAAM-011186 75Ω reverse-path variable gain amplifier
29 September, 2014M/A-COM Technology Solutions has released the MAAM-011186 75Ω reverse-path variable gain amplifier (VGA). The integrated, two-stage, differential amplifier operates from 5 to 300 MHz, with an embedded digital step attenuator (DSA) for CATV reverse-path applications.
