Components > Filters

SCHURTER FMAD NEO three-phase mains filter with neutral line

16 August, 2019

FMAD NEO is the name of SCHURTER's latest single-stage filter family for three-phase systems with a neutral line. Compact with high performance, the filter series is suitable for use in today's portable industrial machines.


Three-phase mains filter released

01 January, 2019

Especially compact with high performance, SCHURTER's FMAC NEO filter family is designed to occupy less floor space in manufacturing plants.


NewEdge Signal Solutions SAX270 tunable bandpass filter

20 December, 2018

The SAX270 electronically tunable bandpass filter, from NewEdge Signal Solutions, is designed for the extended UHF band in tactical communications applications.


NewEdge Signal Solutions SAX239 30–520 MHz tunable bandpass filter

13 June, 2017

The SAX239 is a 30–520 MHz tunable bandpass filter from NewEdge Signal Solutions, offering good power handling (+33 dBm) and DC power consumption (<100 mW) in a small form factor.


Narda Safety Test Solutions external RF filters

23 March, 2017

The Narda Safety Test Solutions external RF filters are designed for the IDA 2 handheld signal analyser.


PMI 6SFB-100M18G-1MP-MAH switched filter bank

16 May, 2016

PMI's 6SFB-100M18G-1MP-MAH is a switched filter bank operating over the frequency range of 100 MHz to 18 GHz. The unit incorporates a two-way absorptive switch to select an input along with two six-way switches, allowing one of the six filter paths to be chosen.


Tunable filter for faster internet

20 November, 2015

Canadian researchers have designed a new tunable filter with the widest tuning span ever demonstrated on a silicon chip that could help provide the low-cost flexibility needed for the next generation of high-speed optical networks.


Mini-Circuits BFCN-4800+ LTCC band-pass filter

09 June, 2015

Mini-Circuits' BFCN-4800+ LTCC band-pass filter has a passband from 4400 to 5200 MHz, supporting telemetry, satellite, mobile, military and commercial application bands.


Mornsun FC-L01D and FC-L01D2 series AC/DC EMC filters

27 August, 2013

Mornsun’s compact FC-L01D and FC-L01D2 series of filters can be applied for use in analog circuits that are noise sensitive and require a higher level of EMC and EMI compliance.


TDK B84773 and B84776 series IEC inlet filters

21 March, 2013

TDK Corporation has expanded the EPCOS B84771 IEC inlet filter series with two series: the B84773 series features an integrated fuse, while the B84776 series has both a switch and a fuse.


ON Semiconductor BelaSigna R262 wideband advanced noise reduction system-on-chip

15 October, 2012

ON Semiconductor BelaSigna R262 is a system-on-chip (SoC) system that provides wideband single- or dual-microphone noise reduction in a diverse range of voice capture devices.


Schaffner FN9280/FN9290 IEC inlet filter range

09 August, 2012

The Schaffner FN9280 and FN9290 IEC inlet filters are equipped with C14 type IEC appliance inlets. Tight RF jointing comprising flange frames with deep-drawn steel housings provide a high degree of shielding and against strong magnetic fields.


TDK multilayer bandpass filter

18 July, 2012

TDK’s multilayer bandpass filter is designed for the 2.4 GHz band, and is suitable for Bluetooth and wireless LAN implementation in smartphones, regular mobile phones and other mobile devices.


TriQuint Semiconductor RF SAW filter range

22 April, 2012

Richardson RFPD has released three RF surface acoustic wave (SAW) filters from TriQuint Semiconductor.


Crystek CBPFS SAW band pass filters series

25 July, 2011 by

Crystek has introduced a range of SAW band pass filters, the CBPFS series. Encased in a rugged SMA housing, the range is designed for test equipment and general lab use.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd