Components > Op amps

STMicroelectronics TSZ182 chopper op amps

13 February, 2017

The TSZ182 dual-precision op amp from STMicroelectronics combines low and temperature-stable input-offset voltage with the added advantages of a 3 MHz gain-bandwidth, rail-to-rail inputs and outputs, and ultrasmall 2 x 2 mm DFN8 or Mini-SO8 package options.


STMicroelectronics TSU111 nano-power op amp

15 December, 2016

With its 1.2 x 1.3 mm outline and typical current of 900 nA, the TSU111 nano-power op amp from STMicroelectronics helps cut the size and energy needs of analog circuits to the bare minimum in medical monitors, wearable electronics, gas detectors, pH sensors, infrared motion sensors and payment tags.


STMicroelectronics LM2904WHYST dual op amp and LM2903WHYST dual comparator

06 October, 2016

STMicroelectronics has introduced AEC-Q100 Grade-0 op amps and comparators in the space-saving MiniSO8 package, giving automotive designers twice the freedom to miniaturise ECUs deployed in extreme temperature environments and safety-critical systems.


STMicroelectronics TSX7 series precision 16 V op amps

12 May, 2016

STMicroelectronics has introduced the TSX7 series of precision 16 V op amps, featuring a wide operating-voltage range and good robustness. The low input-offset voltage, common-mode rejection ratio and temperature drift eliminate any need for trimming or calibration in the assembled circuit while ensuring consistent performance over a wide automotive-grade temperature range from -40 to 125°C.


STMicroelectronics TSB572 and TSB611 op amps

19 April, 2016

STMicroelectronics has introduced two 36 V op amps that deliver enhanced performance and ruggedness in automotive and industrial applications. The op amps feature a wide supply-voltage range, stability in challenging operating conditions and tolerance of electrostatic discharge up to 4 kV (HBM).


Maxim MAX44251 op amp

15 February, 2012

Maxim has introduced the MAX44251, a 20 V, ultra-precise, low-noise, dual op amp that extends maintenance system uptime and maximises sensor performance.


Diodes APX4558 low-noise op amps

25 April, 2011 by

With a low-input noise performance of 8nV/Hz at 1 kHz, the APX4558 dual-channel op amps from Diodes meet demands for higher-performance audio without an increase in BOM cost.


Maxim MAX9622 precision operational amplifier

19 October, 2010 by

Maxim has introduced the MAX9622, a precision operational amplifier with high gain bandwidth that employs an auto-trimming technique to precisely calibrate the input-offset voltage (Vos) on power-up.


Maxim MAX9613/MAX9615 low-power precision operational amplifiers

19 October, 2010 by

Maxim has introduced the MAX9613/MAX9615, low-power, precision operational amplifiers with rail-to-rail I/O. They have a self-calibration feature that allows offset correction or nulling at any time or temperature.


Maxim MAX9622 precision operational amplifier

19 October, 2010

Maxim has introduced the MAX9622, a precision operational amplifier with high gain bandwidth that employs an auto-trimming technique to precisely calibrate the input-offset voltage (Vos) on power-up.


Maxim MAX9613/MAX9615 low-power precision operational amplifiers

19 October, 2010

Maxim has introduced the MAX9613/MAX9615, low-power, precision operational amplifiers with rail-to-rail I/O. They have a self-calibration feature that allows offset correction or nulling at any time or temperature.


Linear Technology LTC6252/3/4 and LTC6255/6/7 operational amplifiers

30 August, 2010 by

Linear Technology has introduced the LTC6252/3/4 and LTC6255/6/7 single/dual/quad rail-to-rail operational amplifiers, providing speed and power efficiency in tiny packages.


Texas Instruments JFET-input op amps family

13 August, 2010 by

A family of JFET-input op amps featuring ultra-low-noise and distortion to maximise audio system quality and performance has been introduced.


National Semiconductor PowerWise LPV521 nanopower op amp

13 November, 2009 by

The PowerWise LPV521 nanopower op amp from National Semiconductor provides what is claimed to be the lowest power consumption at 552 nW, with guaranteed operation down to 1.6 V.


High-speed op amps

17 June, 2009 by

Microchip has announced what it claims is the world’s first and only op amp to include mCal, an on-chip calibration circuit that calibrates offset voltage at power-up using an internal power on-reset detector or based on the state of an external pin.


  • All content Copyright © 2018 Westwick-Farrow Pty Ltd