R&S FSV3000 signal and spectrum analyser
01 May, 2019The R&S FSV3000 features functions that make complex measurements fast and easy. Setting up RF parameters with touchscreen gestures is as easy as using a smartphone.
Narda SignalShark Remote Module
25 January, 2019Narda Safety Test Solutions' SignalShark Remote Module is a real-time remote analyser that detects, analyses, classifies and localises RF signals in the frequency range between 8 kHz and 8 GHz with a high degree of precision.
Elspec G4500 three-phase power quality analyser
01 January, 2019The Elspec G4500 is a power quality analyser that utilises the PQZIP algorithm, enabling the user to continuously measure, store and analyse waveform signals regardless of their size.
Beamex MC6 Multifunction Calibrator
24 December, 2018The NATA certified Beamex MC6 Multifunction Calibrator provides calibration capability for pressure, temperature, electrical and frequency signals.
ICP DAS HRT-370 upright HART signal filter
06 December, 2018The HRT-370 is an upright HART signal filter which has been designed specifically by ICP DAS to solve the issue of analog signals being interfered with when an additional HART signal is added to the communications process.
Noise XT NXA phase noise analyser
30 November, 2018Noise XT has released the NXA Series fully automated phase noise analyser, which has a frequency range from 2 MHz to 6, 26 or 50 GHz.
Anritsu MS269xA Series Signal Analyzer now supporting 5G NR Analysis
01 August, 2018Anritsu has announced that the MS269xA series signal analysers now support measurements of RF Tx characteristics of 5G mobile communications base stations and terminals.
Anritsu MS2850A Signal Analyzer for 5G NR Analysis to Power 5G Service Rollout
01 June, 2018Anritsu announces the launch of five additional 5G measurement software options for its MS2850A Signal Analyzer. The five software options are compliant with the 3GPP 5G standards (5G NR hereafter) and used for measuring the RF Tx characteristics of next-generation 5G base stations and mobile terminals.
Spectrum DN2.59x series digitizerNETBOX digitiser range
18 May, 2018The DN2.59x digitizerNETBOX series has 16-bit ADC technology to deliver 256 times more resolution than 8-bit technology.
Keysight E8740A Automotive Radar Signal Analysis and Generation Solution
27 April, 2018The Keysight E8740A Automotive Radar Signal Analysis and Generation Solution enables radar-based, advanced driver assistance systems to proactively detect and mitigate risks of collisions.
Huntron Access DH2 Prober robotic flying probe system
20 April, 2018The Access DH2 Prober is a dual-head robotic flying probe system suitable for low-volume PCA testing where the interfacing between two points is necessary.
Digitiser to help generate record-breaking magnetic fields
01 November, 2017The University of Tokyo's International MegaGauss Science Laboratory is attempting to set a new world record for the highest ever indoor magnetic field.
Anritsu High-Performance Signal Analyzer for 5G and Wideband Signal Measurement
01 October, 2017Anritsu has announced the release of its high-performance MS2850A Signal Analyzer targeting development and commercial production of 5G mobile communications systems.
Rohde & Schwarz ZNLE vector network analyser
01 September, 2017Rohde & Schwarz has launched the R&S ZNLE vector network analyser to address the requirements of customers looking to perform RF measurements to characterise components such as antennas, attenuators, filters and PCBs.
Spectrum Boxcar averaging function for digitisers
16 May, 2017Spectrum has announced the Boxcar averaging function for its extensive range of modularly designed digitisers, which smooths out high-frequency noise to give a clear signal.