Test & measure > Signal generators

Physicists produce signals with attosecond duration

22 June, 2023

A team of physicists has used paired laser pulses to compress a series of electron pulses to a numerically analysed duration of 0.000000000000000005 seconds.


NTT claims optical transmission record

03 November, 2022

Telecommunications company NTT has reportedly achieved the world’s fastest optical transmission experiment of digital coherent optical signals over 2 Tbits/s per wavelength.


ICP DAS iWSN-110X-240-ME current-sensing module

29 April, 2022

A self-powered module for AC current, digital input and temperature measurement, it can harvest the demand electricity from CT-induced current so that there is no necessity to supply the power line for power supply.


ICP DAS I-7531-FD-G CAN/CAN FD signal repeater

05 April, 2022

ICP DAS's I-7531-FD-G is a CAN/CAN FD signal repeater that can connect two or more CAN networks with the same baud rate.


ICP DAS PEX-D64 PCI Express digital I/O board

25 November, 2021

Supporting PCI Express bus, the product provides 32-channel DI and 32-channel DO consisting of two 16-bit input ports and two 16-bit output ports.


R&S SMM100A vector signal generator

28 October, 2021

The R&S SMM100A vector signal generator offers mmWave testing capabilities. It has good RF characteristics across the entire frequency range from 100 kHz to 44 GHz and supports both 5G FR1 and FR2 testing.


Spectrum Instrumentation M2p.7515-x4 digital I/O card

28 April, 2021

The M2p.7515-x4 from Spectrum Instrumentation offers a way to generate and acquire fast digital signals using a half-length PCIe card that measures just 168 x 107 mm in size.


STMicroelectronics STISO621 digital isolator

22 April, 2021

STMicroelectronics has released the STISO621 dual-channel digital isolators, a series of high-performance ICs for industrial applications and general optocoupler replacement.


ICP DAS iWSN-1110X current-sensing module

03 February, 2021

The iWSN-1110X, from ICP DAS, is a self-powered current-sensing module for AC, digital input and temperature measurement.


Spectrum Instrumentation hybridNETBOX multichannel AWG and digitiser

18 September, 2020

Spectrum Instrumentation's hybridNETBOX is an instrumentation platform for applications that require simultaneous signal generation and acquisition.


SIGLENT SSG5000X series RF signal generators

20 May, 2020

SIGLENT's SSG5000X series of signal generators can generate analog and vector signals. They have a frequency range of 9 kHz to 4/6 GHz and offer high performance in phase noise, spectral purity, bandwidth, EVM and output power.


Aim-TTi TGR2050 series RF signal generators

06 February, 2020

Aim-TTi has released the TGR2050 series of next-generation radio frequency (RF) signal generators, featuring a small footprint and lightweight design that should benefit electronic design and test engineers.


C.Scope DXL4 and SGV4 Cable and Pipe Locator

01 January, 2020

The DXL4 cable avoidance tool and signal generator from C.Scope is able to successfully detect even hard-to-find pipes and cables while minimising the potential for human error.


elf E10974001 non-contact current sensor

15 August, 2019

The elf E10974001 non-contact current sensor is specifically designed for sensing small currents. It is useful in situations where users need to monitor current without interrupting the wiring.


Keysight VXG microwave signal generators

25 April, 2019

Keysight Technologies' VXG microwave signal generators are designed to address demanding wideband millimetre-wave (mmWave) applications for 5G and satellite communications by decreasing test set-up complexity and reducing path losses introduced in over-the-air (OTA) test environments.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd