Test & measure

Power Parameters Hioki 3280 series of clamp testers

13 August, 2010 | Supplied by: Power Parameters Pty Ltd

The Hioki 3280 series of clamp testers with double opening jaws enables clamping of conductors up to 33 mm in diameter and 35 mm (model 3288 and 3287) even in confined spaces.

Fluke 233/A wireless remote display motor vehicle digital multimeter kit

13 August, 2010 | Supplied by: Fluke Australia Pty Ltd

The 233/A wireless remote display motor vehicle digital multimeter kit is now available.

Agilent N9342C handheld spectrum analyser

13 August, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd

The N9342C handheld spectrum analyser (HSA) is suitable for performing installation, maintenance and surveillance of RF systems in the field.

Rohde & Schwarz high-end oscilloscopes

28 July, 2010 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

Oscilloscopes with a claimed highest active signal acquisition rate available and the first purely digital trigger system and touch-screen operation form the basis of two families in a six scope range from Rohde & Schwarz.

JDSU EDT 135 E1 and data tester

27 July, 2010 | Supplied by: TechRentals

The JDSU EDT 135 E1 and data tester carries out scalable testing on digital networks. It can carry out both framed and unframed tests on a wide variety of equipment.

High-power RF signal generators have the edge

14 July, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd

In RF testing, an essential attribute of every signal generator is the maximum output power it can supply to a device under test (DUT) while maintaining spectral purity and level accuracy.

Current switching and test system accuracy

07 July, 2010 | Supplied by: Scientific Devices Australia

The differences among the types of signals that a test system’s switching hardware must handle are not always well understood. Unless these differences are taken into account in switch system design, they can degrade signal integrity and affect overall test system performance. This article reviews switching techniques for maximising the integrity of current signals.

Unitronix 5330A synchro/resolver simulator

02 July, 2010 | Supplied by: Unitronix Pty Ltd

The 5330A is a rack mount/benchtop programmable synchro/resolver simulation instrument featuring integrated touch-screen controls and input terminals.

Fluke 5080A multi-unit calibrator

02 July, 2010 | Supplied by: Fluke Australia Pty Ltd

The 5080A calibrator is engineered to accurately and easily calibrate both analog and digital test instruments.

Antritsu MG3690C series RF/microwave signal generators

02 July, 2010 | Supplied by: Anritsu Pty Ltd

The MG3690C series of RF/microwave signal generators is claimed to be best-in-class for phase noise and broad frequency generation, allowing users to carry out accurate tests on subsystems, especially those in local oscillator substitution and clock-generation applications.

Appa 605 digital insulation resistance handheld tester

02 July, 2010 | Supplied by: Power Parameters Pty Ltd

The Appa 605 digital insulation resistance handheld tester measures insulation resistance from 10 kΩ to 20 GΩ with test voltages selectable from 50, 100, 250, 500 and 1000 DC. Resistance can be measured from 0.01 Ω to 20 kΩ. Polarisation index and absorption ratio are calculated automatically. The instrument is also usable as an accurate multimeter for measuring voltages to 600 AC/DC and resistance.

Anritsu MG3690C series RF/microwave signal generators

16 June, 2010 | Supplied by: Anritsu Pty Ltd

The MG3690C series of RF/microwave signal generators combines best-in-class phase noise and broad frequency generation to allow engineers to conduct highly accurate tests on subsystems, especially those in local oscillator substitution and clock generation applications.