Current switching and test system accuracy
07 July, 2010 | Supplied by: Scientific Devices Australia
The differences among the types of signals that a test system’s switching hardware must handle are not always well understood. Unless these differences are taken into account in switch system design, they can degrade signal integrity and affect overall test system performance. This article reviews switching techniques for maximising the integrity of current signals.
Unitronix 5330A synchro/resolver simulator
02 July, 2010 | Supplied by: Unitronix Pty Ltd
The 5330A is a rack mount/benchtop programmable synchro/resolver simulation instrument featuring integrated touch-screen controls and input terminals.
Fluke 5080A multi-unit calibrator
02 July, 2010 | Supplied by: Fluke Australia Pty Ltd
The 5080A calibrator is engineered to accurately and easily calibrate both analog and digital test instruments.
Antritsu MG3690C series RF/microwave signal generators
02 July, 2010 | Supplied by: Anritsu Pty Ltd
The MG3690C series of RF/microwave signal generators is claimed to be best-in-class for phase noise and broad frequency generation, allowing users to carry out accurate tests on subsystems, especially those in local oscillator substitution and clock-generation applications.
Appa 605 digital insulation resistance handheld tester
02 July, 2010 | Supplied by: Power Parameters Pty Ltd
The Appa 605 digital insulation resistance handheld tester measures insulation resistance from 10 kΩ to 20 GΩ with test voltages selectable from 50, 100, 250, 500 and 1000 DC. Resistance can be measured from 0.01 Ω to 20 kΩ. Polarisation index and absorption ratio are calculated automatically. The instrument is also usable as an accurate multimeter for measuring voltages to 600 AC/DC and resistance.
Anritsu MG3690C series RF/microwave signal generators
16 June, 2010 | Supplied by: Anritsu Pty Ltd
The MG3690C series of RF/microwave signal generators combines best-in-class phase noise and broad frequency generation to allow engineers to conduct highly accurate tests on subsystems, especially those in local oscillator substitution and clock generation applications.
National Instruments WLAN Measurement Suite 2.0
16 June, 2010 | Supplied by: National Instruments Aust Pty Ltd
The WLAN Measurement Suite 2.0, a solution for IEEE 802.11n wireless LAN (WLAN) testing, includes enhanced software toolkits for IEEE 802.11n WLAN signal generation and analysis.
Kistler Evaluation Instrument CoMo torque type 4700A
08 June, 2010 | Supplied by: SI Instruments
The Kistler Evaluation Instrument CoMo torque type 4700A is suitable for industrial use and for research and development applications.
Tektronix TLA7SA16 and TLA7SA08 logic protocol analyser modules
08 June, 2010 | Supplied by: TekMark Australia Pty Ltd
Tektronix has announced a test solution for PCI Express 3.0, the next-generation PCIe specification, spanning protocol to physical analysis in a single tool.
PMM 9010/9030 EMI test receiver
19 May, 2010 | Supplied by: Consultant Technology Australia Pty Ltd
The EMI emission testing limits for EMC compliance are altering from 1 to 3 GHZ.
Anritsu MS2711D-31-25 spectrum master
19 May, 2010 | Supplied by: TechRentals
The Anritsu spectrum master MS2711D-31-25 is a rugged, ultra-lightweight, battery-operated instrument that allows users to conduct measurements for field environments and other mobile applications.
IDM IT9101 inclinometer
17 May, 2010 | Supplied by: IDM Instruments
The IT9101 is a rugged and simple device which provides a voltage divider feedback signal for incline position. The heart of the instrument is a magnetically-damped pendulum coupled to a conductive plastic precision potentiometer.
LeCroy ArbStudio series waveform generators
17 May, 2010 | Supplied by: Vicom Australia Pty Ltd
LeCroy has released the ArbStudio series of arbitrary waveform generators capable of generating signals up to 125 MHz with high sample rate, long memory and high resolution as well as a variety of operating modes, modulation capabilities and a digital pattern generator.
Advantest R37XX vector network analysers
17 May, 2010 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd
The 300 MHz and 6 GHz vector network analysers are designed to install in a PCI slot.
LeCroy LogicStudio 16 logic analyser
17 May, 2010 | Supplied by: Vicom Australia Pty Ltd
LeCroy has announced the LogicStudio 16, a logic analyser with hardware that provides 16 channels with a sample rate of 1 GSps and maximum input of up to 100 MHz.
