Programmable noise generator
14 April, 2009 | Supplied by: ASD Technology Pty Ltd
ASD Technology has released the NW-ATE series of rugged programmable noise generators for automatic test applications.
Agilent analog signal generator
14 April, 2009 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent has available a compact microwave analog signal generator that is an extension to the MXG generator platform, providing frequency coverage to 20, 32 or 40 GHz.
Specialised calibration
14 April, 2009 | Supplied by: EMC Technologies Pty Ltd
EMC Technologies has commissioned a specialist calibration laboratory to service the EMC and EMR/EMF/EME testing sectors, including third-party EMC test laboratories.
Automated safety analysers
14 April, 2009 | Supplied by: Westek Electronics Pty Ltd
The Vitrek V60 series electrical safety analyser provides a choice of AC, AC and DC dielectric strength testing, with or without insulation resistance testing, and ground continuity testing in accordance with UL, CSA and IEC standards.
WLAN measurement suite software
08 April, 2009 | Supplied by: http://www.ni.com/automatedtest/wlan.htm
The wireless local area network (WLAN) test solution from NI can generate and analyse RF signal measurements four times faster than other modular instrumentation solutions and up to 10 times faster than traditional box instruments.
Switch and measure/control subsystem
08 April, 2009 | Supplied by: http://tekmarkgroup.com/
The EX1200 series is a high density switch and measure/control subsystem with the capacity to switch up to 576 channels of voltage or temperature in a single rack U mainframe. Mix and match a variety of modules to build a comprehensive signal switching and I/O subsystem that performs data logging, level detection and control.
Mixed signal ’scopes
08 April, 2009 | Supplied by: TekMark Australia Pty Ltd
Tektronix has released the MSO2000 mixed signal and DPO2000 digital phosphor oscilloscopes.
Debug kit
08 April, 2009 | Supplied by: Microchip Technology Australia
Microchip has announced the PICkit 3 debug express kit to overcome the cost and complexity barriers for code development and embedded programming.
Diagnostic tools
08 April, 2009 | Supplied by: Metromatics Pty Ltd
The 2800 series of Huntron Tracker is designed to complement conventional test instruments in the debug and troubleshooting process.
Fieldbus test tool
08 April, 2009 | Supplied by: Fluke Australia Pty Ltd
Fluke has introduced two models to its range of colour ScopeMeter test tools with automated test capability for Fieldbus, Profibus and other industrial communication protocols.
In-circuit debugger
01 April, 2009 | Supplied by: Microchip Technology Australia
Microchip has announced a development tool that supports in-circuit programming and debugging of the company’s flash-based 8-bit PIC microcontrollers and its range of 16- and 32-bit MCUs and 16-bit dsPIC digital signal controllers.
MT8852B Bluetooth tester
01 April, 2009 | Supplied by: Anritsu Pty Ltd
Anritsu has introduced what it claims is the world’s first integrated test set to measure the new generation of Bluetooth low-energy products, as well as a solution to support the enhanced power control feature.
Digital multimeters
01 April, 2009 | Supplied by: Eaton Electrical (Australia) Pty Ltd
Eaton has introduced the Kyoritsu digital multimeter range of four models: the 1051, 1052, 1061 and 1062.
Oscilloscopes ranging from 100 to 200 MHz
11 February, 2009 | Supplied by: TekMark Australia Pty Ltd
The MSO2000 and DPO2000 Series of oscilloscopes each consist of three models ranging from 100 MHz to 200 MHz, with two or four analog channels, the familiar Tektronix front-panel layout, serial triggering, protocol decode, USB plug-and-play PC connectivity, a seven inch widescreen bright TFT display.
'Top trends' in test and measure
05 February, 2009
National Instruments has identified three trends that will improve the efficiency of test and measurement systems in 2009.
