Node B analyser
10 May, 2005 | Supplied by: http://www.anritsu.com/
Anritsu has introduced the MT8220A UMTS Master, an ultra-portable handheld node B analyser.
Timer cards
03 March, 2005 | Supplied by: http://www.ieci.com.au/
Interworld Electronics has released a range of analog output, digital I/O, relay output, isolated digital input and watchdog timer cards for the Universal PCI/PCI-X bus.
Industrial calibrator
03 March, 2005 | Supplied by: http://www.edrelectronics.com.au/
EDR Electronics has released the IZYCAL-100 Australian designed and manufactured industrial calibrator. It is designed to be used as both a DC source and a DC measurement instrument and is capable of providing measurement or source on two terminals only.
Controller calibration
17 February, 2005
AVT Services is operating a calibration laboratory for regular calibration and repair of mass flow controllers of all brands.
MobileCorder MV-innovative paperless recorder
03 February, 2005 | Supplied by: TRIO Test & Measurement
The MobileCorder MV-innovative paperless recorders are designed for networked data-environments.
Leakage tester
17 January, 2005 | Supplied by: http://www.yokogawa.com.au/
Yokogawa's 30031 clamp-on leakage current tester is capable of measuring currents down to 1 mA with a resolution of 0.001 mA, making it suitable for checking the insulation of low-voltage circuit and electrical components.
BERT 20E1 network testing
17 January, 2005 | Supplied by: Megger Limited
The Megger BERT 20E1 handheld test set has been designed for easy operation, yet it performs an extensive evaluation of the integrity, configuration and performance of an E1 network.
LT Megger loop testers
17 January, 2005 | Supplied by: Power Parameters Pty Ltd
The LT Megger single- and three-phase loop testers are safe to use even if accidentally applied to live circuits.
FSH6 spectrum analyser
06 December, 2004 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd
Rohde & Schwarz has expanded the frequency range of its handheld spectrum analyser to 6 GHz, making it suitable for all WLAN 802.11a applications as well as for general laboratory applications in higher frequency ranges.
Field strength meter
06 December, 2004 | Supplied by: http://www.westek.com.au/
The Smart Fieldmeter is suitable for field strength measurements in applications including AM and FM radio stations, TV stations, mobile telephony, industrial apparatus and EMC testing.
New FPGA Debug and Validation tool
06 December, 2004 | Supplied by: http://www.agilent.com/find/scope-new
Agilent Technologies Inc. has announced the industry's first field programmable gate array (FPGA) dynamic probe application for Agilent Infiniium mixed signal oscilloscopes (MSOs). The Agilent N5397A FPGA dynamic probe yields significant productivity improvements for engineering teams debugging Xilinx FPGAs. This application reduces the overall time and cost involved in debug and validation of designs incorporating FPGA development.
Harmonics/flicker analyser
06 December, 2004 | Supplied by: http://www.contec.com.au/
The EM Test model DPA 500 is a fully compliant analyser for harmonics and flicker and meets the latest IEC/EN 61000-3-2 and IEC/EN 61000-3-3 requirements. It also follows the design specifications of IEC/EN 61000-4-7:2002 (for Class A instruments) and IEC/EN 61000-4-15:2003.
Ethernet analyser
06 December, 2004 | Supplied by: http://www.fluke.com.au/
The EtherScope network assistant is a next generation handheld analyser designed to aid the rapid installation, maintenance and troubleshooting of 10/100/gigabit enterprise networks.
ADSL testing
15 November, 2004 | Supplied by: http://www.vicom.com.au/
Vicom has announced the Colt-150 ADSL test set from Consultronics.
N5230A network analyser
12 October, 2004 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent has introduced its four-port, 20 GHz vector network analyser for measuring multiport, balanced components such as filters, duplexers and RF modules.
