Test & measure

Software update

10 May, 2005 | Supplied by: http://www.pacsat.com.au/

Berkeley Varitronics Systems has released a software update for its Yellowjacket 802.11b receiver, version 4.0 for HP iPAQ PocketPC platform. The down-loadable update is free for all users and adds several new analysis screens including signal-to-noise ratio, channel frequency response and WISP antenna alignment.

Node B analyser

10 May, 2005 | Supplied by: http://www.anritsu.com/

Anritsu has introduced the MT8220A UMTS Master, an ultra-portable handheld node B analyser.

Industrial calibrator

03 March, 2005 | Supplied by: http://www.edrelectronics.com.au/

EDR Electronics has released the IZYCAL-100 Australian designed and manufactured industrial calibrator. It is designed to be used as both a DC source and a DC measurement instrument and is capable of providing measurement or source on two terminals only.

Timer cards

03 March, 2005 | Supplied by: http://www.ieci.com.au/

Interworld Electronics has released a range of analog output, digital I/O, relay output, isolated digital input and watchdog timer cards for the Universal PCI/PCI-X bus.

Controller calibration

17 February, 2005

AVT Services is operating a calibration laboratory for regular calibration and repair of mass flow controllers of all brands.

MobileCorder MV-innovative paperless recorder

03 February, 2005 | Supplied by: TRIO Test & Measurement

The MobileCorder MV-innovative paperless recorders are designed for networked data-environments.

Leakage tester

17 January, 2005 | Supplied by: http://www.yokogawa.com.au/

Yokogawa's 30031 clamp-on leakage current tester is capable of measuring currents down to 1 mA with a resolution of 0.001 mA, making it suitable for checking the insulation of low-voltage circuit and electrical components.

LT Megger loop testers

17 January, 2005 | Supplied by: Power Parameters Pty Ltd

The LT Megger single- and three-phase loop testers are safe to use even if accidentally applied to live circuits.

BERT 20E1 network testing

17 January, 2005 | Supplied by: Megger Limited

The Megger BERT 20E1 handheld test set has been designed for easy operation, yet it performs an extensive evaluation of the integrity, configuration and performance of an E1 network.

Ethernet analyser

06 December, 2004 | Supplied by: http://www.fluke.com.au/

The EtherScope network assistant is a next generation handheld analyser designed to aid the rapid installation, maintenance and troubleshooting of 10/100/gigabit enterprise networks.

Harmonics/flicker analyser

06 December, 2004 | Supplied by: http://www.contec.com.au/

The EM Test model DPA 500 is a fully compliant analyser for harmonics and flicker and meets the latest IEC/EN 61000-3-2 and IEC/EN 61000-3-3 requirements. It also follows the design specifications of IEC/EN 61000-4-7:2002 (for Class A instruments) and IEC/EN 61000-4-15:2003.

FSH6 spectrum analyser

06 December, 2004 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

Rohde & Schwarz has expanded the frequency range of its handheld spectrum analyser to 6 GHz, making it suitable for all WLAN 802.11a applications as well as for general laboratory applications in higher frequency ranges.

Field strength meter

06 December, 2004 | Supplied by: http://www.westek.com.au/

The Smart Fieldmeter is suitable for field strength measurements in applications including AM and FM radio stations, TV stations, mobile telephony, industrial apparatus and EMC testing.

New FPGA Debug and Validation tool

06 December, 2004 | Supplied by: http://www.agilent.com/find/scope-new

Agilent Technologies Inc. has announced the industry's first field programmable gate array (FPGA) dynamic probe application for Agilent Infiniium mixed signal oscilloscopes (MSOs). The Agilent N5397A FPGA dynamic probe yields significant productivity improvements for engineering teams debugging Xilinx FPGAs. This application reduces the overall time and cost involved in debug and validation of designs incorporating FPGA development.