Agilent Technologies E5063A ENA Series network analyser for testing simple RF passive components
28 February, 2014 | Keysight Technologies Australia Pty LtdAgilent Technologies has announced the E5063A ENA Series network analyser. The instrument offers optimised performance and functionality for testing simple RF passive components, such as handset/BTS antennas, RF cables and filters. The product provides high RF performance, including trace noise of 0.002 dBrms and stability of 0.01 dB/°C. This helps reduce test cost without sacrificing quality.
GainSpan GS2011M Wi-Fi module
28 February, 2014 | Glyn LtdThe GS2011M module by GainSpan provides a quick and easy way for device and appliance manufacturers to add Wi-Fi connectivity to their products. It adds low-power, high-speed Wi-Fi and internet connectivity to any device with a microcontroller and serial host interface.
Phase 3 Powersafe connector series
28 February, 2014 | Connector-Tech ALS Pty LtdThe Phase 3 Powersafe connector series offers good ingress protection. The sequential mating box is IP54-rated before the Powersafe connectors - which are IP67-rated - are installed. Once the connectors are installed, the complete assembly is IP67-rated. If an IP67 rating is required to withstand exposure to wet conditions at all times, Phase 3 recommends surrounding the sequential mating box with an IP-rated electrical enclosure.
Maxim Integrated Santa Cruz ambient light sensor
27 February, 2014 | Avnet Electronics MarketingUsing the Santa Cruz ambient light sensor (ALS) from Maxim Integrated, factories can quickly configure and monitor multiple red, green, blue (RGB) and infrared (IR) ambient light sensors with the accuracy required in industrial applications.
Texas Instruments ADC12J4000 wideband sampling and digital tuning device
27 February, 2014 | Texas Instruments Australia LtdThe ADC12J4000 is a wideband sampling and digital tuning device. The core technology contained in the device is Texas Instruments' gigasample analog-to-digital converter (ADC) technology that enables a large block of frequency spectrum to be sampled directly at RF. This technology is combined with low-power digital-processing blocks that provide digital filtering and down-conversion.
TDK SESUB-PAN-T2541 Bluetooth 4.0 LE module
26 February, 2014 | Ramelec Pty LtdTDK has available an ultracompact Bluetooth low-energy module designed for the Bluetooth 4.0 low-energy (LE) specification (Bluetooth Smart). With its miniature footprint of 4.6 x 5.6 mm and slim insertion height of 1 mm, the SESUB-PAN-T2541 Bluetooth 4.0 LE module is designed for Bluetooth Smart devices. Due to its compact size, the module is suitable for use in wearable devices.
Network Technologies ENVIROMUX-5D environmental monitoring system
26 February, 2014 | Interworld Electronics and Computer IndustriesThe ENVIROMUX-5D uses sensors to monitor critical environmental and security conditions. When an environmental sensor goes out of range of a configurable threshold or a security sensor is triggered, system administrators will be notified.
Maxim Integrated MAX16993 PMIC for automotive applications
25 February, 2014 | Avnet Electronics MarketingThe Maxim Integrated MAX16993 power-management integrated circuit (PMIC) is a 2.1 MHz, multichannel, DC-DC converter. The device integrates three supplies in a small footprint. It includes one high-voltage step-down controller (OUT1) designed to run directly from a car battery and two low-voltage step-down converters (OUT2/OUT3) cascaded from OUT1. Under no-load conditions, the product consumes only 30 µA of quiescent current, making it suitable for automotive applications.
TOKO MDT series multilayer ferrite chip power inductors
24 February, 2014 | Wireless ComponentsTOKO has announced the MDT series of multilayer ferrite chip power inductors. The company's architecture creates robust, magnetically shielded, multilayer ferrite power inductors offering low resistance and high current handling in a miniature footprint.
Vincotech flowSiC 0 power modules
24 February, 2014 | Wireless ComponentsVincotech has rolled out its latest SiC-based products for efficient, high-frequency operation in solar inverter, UPS and battery management applications. The flowSiC 0 modules come in two versions.
Eaton 5E UPS range
15 February, 2014 | Eaton Electrical (Australia) Pty LtdEaton has launched the 5E UPS, a range of power protection products designed for workstations, business telephony, routers and point-of-sale equipment. The unit is available in five models, ranging from 650 VA/360 W to 2000 VA/1200 W.
Cypress Semiconductor CY8C24x93 PSoc 1 system-on-chip
14 February, 2014 | element14Cypress Semiconductor has launched the latest low-power device in the PSoC 1 family. The kit features Cypress’s CY8C24x93 low-power PSoC 1 and an ultralow-power, low pin count configuration.
Banner Engineering SC26-2 Programmable Safety Controller
14 February, 2014 | Micromax Pty LtdThe Banner Engineering SC26-2 Programmable Safety Controller provides PLC-level capability and control without the programming complexity and steep learning curve of traditional PLCs.
Wavelex WLA0210N low-noise amplifier
14 February, 2014 | Wireless ComponentsThe WLA0210N is a 0.2 to 1.0 GHz, N-connectorised, low-noise amplifier (LNA) from Wavelex. The product features 50 Ω impedance, 0.7 dB noise figure, 20 dB gain, 1.35:1 VSWR and +17 dBm P1dB.
Erntec 3890 CR DC micromotors
13 February, 2014 | ERNTEC Pty LtdThe 3890 CR series from Erntec is based on the motor concept of the CR DC micromotors series with graphite commutation from Faulhaber.
