NI LabVIEW 2012 system design software
22 August, 2012 | National Instruments Aust Pty LtdNational Instruments has introduced NI LabVIEW 2012, the latest version of the system design software for engineers and scientists. Users gain ready-to-run starting points for a breadth of LabVIEW applications and access to training options that help improve the quality of their systems. The version supports a large portfolio of new hardware products to expand platform capabilities and enable cutting-edge systems.
NI CompactDAQ embedded measurement and logging platform
22 August, 2012 | National Instruments Aust Pty LtdNational Instruments has released the stand-alone NI CompactDAQ system, a high-performance embedded measurement and logging platform with a built-in dual-core Intel processor for running data acquisition, online analysis and logging software.
Europlasma Nanofics coatings
22 August, 2012 | Kobot SystemsNanofics coatings on electronic components such as PCBs provide a surface barrier against water and oil and protect against corrosion and oxidation.
Harwin EZ BoardWare SMT spring contact range
21 August, 2012 | Clarke & Severn Electronic SolutionsHarwin’s EZ BoardWare SMT spring contacts (also known as grounding/RFI contacts, spring or shield fingers) can be assembled to PCBs and used as grounding or shielding contacts or for general electrical connections between PCBs or similar.
Sintrones VBOX-3100 mobile digital video recorder system
21 August, 2012 | Backplane Systems Technology Pty LtdThe VBOX-3100, an Intel D525 dual core mobile digital video recorder system by Sintrones, has been released.
IEI Technology KINO-CVR-D25502/N26002 single board computer
21 August, 2012 | ICP Electronics AustraliaIEI Technology’s single board computer, the KINO-CVR-D25502/N26002, features 6 x SATA 3 Gbps ports with RAID 0/1/5/10 support for cloud computing and storage applications.
Harwin Datamate J-Tek crimp connector range
21 August, 2012 | Clarke & Severn Electronic SolutionsHarwin has increased the flexibility of its Datamate range by offering the male and female J-Tek crimp connectors with a choice of extended rear walls.
National Instruments CompactDAQ embedded measurement and logging platform
21 August, 2012 | National Instruments Aust Pty LtdThe stand-alone NI CompactDAQ system, a high-performance embedded measurement and logging platform with a built-in dual-core Intel processor for running data acquisition, online analysis and logging software, has been released.
ICP Electronics TANK-720-QM67 fanless embedded system
21 August, 2012 | ICP Electronics AustraliaThe TANK-720-QM67 fanless embedded system has a 2nd Generation Intel mobile Core i7/i5/i3 and Celeron processor.
Aerospace & Defence Marl 748 series floodlight
20 August, 2012 | Aerospace & Defence ProductsDesigned and manufactured in Britain, the Marl 748 series floodlight is 10 cm deep but delivers 3000 lumens from an input of 56 W.
ETM Pacific ETM450C industrial ethernet router
20 August, 2012 | ETM Pacific Pty LtdA dual SIM 3G/HSPA+ industrial ethernet router has been added to ETM’s range of 3G serial modems and 3G/HSDPA router.
International Rectifier 600 V IGBTs
20 August, 2012 | Mouser ElectronicsA family of motor vehicle-qualified 600 V IGBTs for electric and hybrid vehicle applications including air-conditioner inverters, pumps and positive temperature coefficient (PTC) heaters has been introduced.
Avalue FPC-08WA1 Industrial Fanless Touch Panel PC
20 August, 2012 | Backplane Systems Technology Pty LtdThe FPC-08WA1 is an 8.9″ WSVGA TFT touch panel PC with an AMD Geode LX800 CPU and is suitable for delivering multimedia applications on a small screen. The interactive touch panel PC has a fanless design and low power consumption rate of 12 W.
Times Microwave Systems antenna brochure
19 August, 2012 | Rojone Pty LtdTimes Microwave Systems has released its RF interconnect solutions for distributed antenna systems brochure.
Times-Protect LP-GPX-05-T lightning protector range
18 August, 2012 | Rojone Pty LtdThe Times-Protect LP-GPX-05-T high-performance lightning protector series is a DC pass design for protecting GPS receivers requiring up to 5 VDC to be supplied on the centre pin for L1, L2 and L3 bands.
