Wakefield-Vette SKV Series skived fin heat sinks
25 June, 2019 | Supplied by: Wireless ComponentsThe SKV Series skived fin heat sinks, from Wakefield-Vette, are designed to support the latest trends in renewable energy, industrial electrification and transportation.
NeoDen7 pick-and-place machine
24 June, 2019 | Supplied by: Embedded Logic Solutions Pty LtdThe NeoDen7 features six simultaneous pick-up heads and has been designed for ease of use, efficiency and increased expandability and compatibility. Its feature set makes it suitable for low-volume assembly.
LPKF Laser & Electronics circuit board plotters
20 June, 2019 | Supplied by: Embedded Logic Solutions Pty LtdThe LPKF ProtoMat S64 and LPKF ProtoMat S104 fully automated machines ensure the production of fine structures up to 100 µm.
Advantech AIMB-286 Mini-ITX industrial motherboard
01 June, 2019 | Supplied by: Advantech Australia Pty LtdThe AIMB-286 THIN Mini-ITX industrial motherboard, from Advantech, supports the latest 8th Generation Intel Core Processors. It features Intel's 9th generation graphics engine for the latest in video acceleration, as well as an Intel H310 chipset that provides abundant I/O in a flat, thin design of only 25 mm.
EXAIR 1/8 NPT small internal mix spray nozzles
22 May, 2019 | Supplied by: Compressed Air Australia Pty LtdEXAIR's 1/8 NPT small internal mix spray nozzles atomise fluids up to 106 L/h. The nozzles mix the liquid and air inside the cap and produce fine atomisation. They can be used on liquids with a viscosity up to 300 cP.
Essential approaches for SMT assembly process control
09 May, 2019 | Supplied by: PCBCartEffective process control is helpful in finding out any issue that may stop assembly manufacturing from smoothly running and minimising the failure rate of products.
Würth Elektronik PowerBasket SMD plug-in power elements for SMT assembly
08 May, 2019 | Supplied by: Wurth Electronics Australia PtyWürth Elektronik ICS has released its first plug-in power elements for SMT assembly, the PowerBasket SMD series. Products in the series are lead free and RoHS compliant, and can be processed on conventional SMT lines and soldered using a convection or vapour phase system.
Acromag XMC730 multifunction I/O XMC mezzanine modules
07 May, 2019 | Supplied by: Metromatics Pty LtdAcromag has introduced the XMC730 mezzanine modules, which provide flexible, high-density I/O with high-performance DMA to solve a variety of SWaP challenges.
Advantech AIMB-U117 UTX industrial motherboard
01 May, 2019 | Supplied by: Advantech Australia Pty LtdThe AIMB-U117 UTX industrial motherboard is equipped with Intel Atom E39XX processors and features three independent displays, onboard eMMC storage and good I/O capabilities.
Top 10 considerations when specifying enclosures
22 April, 2019 by Pat Cookson | Supplied by: Hammond Electronics Pty LtdYour new industrial electronic product has been designed and the board components specified. Now all that has to be done is to decide on the choice of enclosure for it.
iBASE MB995 ATX motherboard
04 April, 2019 | Supplied by: Backplane Systems Technology Pty LtdThe MB995, from iBASE, is an ATX motherboard based on the latest 8th Generation Intel Core processor family. With optimised processor and graphics performance, the board supports the C246 (MB995VF-C246) and the Q370 (MB995VF) chipsets.
OKW enclosure modification service
01 April, 2019 | Supplied by: ROLEC OKW Australia New Zealand P/LOKW Gehäusesysteme has a versatile standard range of design-oriented plastic enclosures and tuning knobs. The requirement for customisation can also be fulfilled by the company's own in-house service centre.
Ultrafast 3D printer for high-performance plastics
18 March, 2019The 3D printer takes only 18 min to produce a plastic component that is 30 cm high, making it suitable for the additive manufacture of large-volume plastic components.
Cambridge Electronic Industries Rapid ConneXions coaxial connectors
14 March, 2019 | Supplied by: Micromax Pty LtdCambridge Electronic Industries has announced a range of connectors designed for automated pick-and-place manufacturing techniques.
PDR ThermoActive Suite Plus rework software
04 March, 2019 | Supplied by: Mektronics Co Pty LtdPDR, a supplier of IR rework technology, has introduced features to its ThermoActive Suite Plus software that will allow the operator to use keyboard functions to execute in-process features such as Thermal Boost, Extended Soak, Skip Zone and Temperature Averaging.
