SMD connectors
27 April, 2009 | Supplied by: Active Components (NZ) Ltd
While resistors and capacitors have been soldered directly onto a PCB with surface-mount technology since the ’80s, the wired units, such as terminals and plug connectors, are still led through holes and soldered on the underside of the board.
Rubber grommets
27 April, 2009 | Supplied by: NPA Pty Ltd
Heyco Products has released a range of rubber grommets for mounting or through-hole wire applications.
Mini enclosures
27 April, 2009 | Supplied by: ERNTEC Pty Ltd
The series 2000 desktop miniature enclosures are suitable for peripheral equipment such as computers, electro medical devices, laboratory equipment, measuring devices and control equipment.
Solder paste aid
27 April, 2009 | Supplied by: Embedded Logic Solutions Pty Ltd
The LPKF StencilCheck software inspects SMT stencils for cleanliness to verify that each aperture is free of debris. Only an absolutely clean stencil ensures an entire and reliable paste release when printing.
Metered rack PDU
24 April, 2009 | Supplied by: Schneider Electric IT Australia
APC has available a metered rack power distribution unit for rack-level power needs within a space-efficient zero-U form factor for high-density applications.
Air-conditioning system
24 April, 2009 | Supplied by: Rittal Pty Ltd
Rittal has launched a computer room air-conditioning system (CRAC) targeting environments in the low- and medium-density range.
Sealed enclosures
17 April, 2009 | Supplied by: Hammond Electronics Pty Ltd
Hammond’s 1457 range extends the capabilities of the 1455 extruded aluminium family of small enclosures with the addition of IP65 sealed die-cast aluminium end panels, enabling the enclosure to be used in dusty and wet environments.
Italtronic’s Thermo range wall enclosures
17 April, 2009 | Supplied by: M Rutty & Co Pty Ltd
Italtronic’s Thermo range of enclosures has been developed to offer users a modern and refined design for wall-mounting applications.
Test platform partnership
17 April, 2009
Agilent has formed a partnership with Aster to enable integration of that company's 'TestWay Coverage Analyst' across Agilent's printed circuit board assembly test platforms.
Security enclosure
17 April, 2009 | Supplied by: Rittal Pty Ltd
Rittal has launched a tamper-proof security enclosure aimed at helping organisations protect their video surveillance equipment.
Laminate range
17 April, 2009 | Supplied by: Clarke & Severn Electronic Solutions
Taconic’s TLX range of laminates provides tight tolerance and controlled electrical and mechanical properties.
Solder paste analyser
14 April, 2009 | Supplied by: Onboard Solutions
Gen3 Systems has introduced the SPA 1000 solder paste analyser that targets OEMs wishing to ensure globally recognised, international soldering quality standards are maintained no matter where their products are manufactured.
Hybrid mouse
14 April, 2009 | Supplied by: Microsoft Pty Ltd
Microsoft has added two new desktop mouses to its range of input devices, with the release of the wireless laser mouse 6000 v2 and wireless laser mouse 7000.
Insulated battery straps
14 April, 2009 | Supplied by: NPA Pty Ltd
High-performance and pre-wired 9 V insulated battery straps are designed to connect most batteries in series or in parallel.
Enclosure fitting
14 April, 2009 | Supplied by: M Rutty & Co Pty Ltd
The Modulbox XT gives increased internal volume allowing 12 modules in width in an enclosure.
