DIN rail enclosures
28 July, 2009 | Supplied by: M Rutty & Co Pty Ltd
The Italtronic Modulbox is a plastic (self-extinguishing PPO) modular DIN rail mount enclosure designed for electronic housing or instrument case applications that require tall components, up to three PC boards or a large number of terminals.
Heat shrink tubes
28 July, 2009 | Supplied by: StockCap
Thin Wall heat shrink tubes have been added to the StockCap range.
Heat sink front panels
28 July, 2009 | Supplied by: Dedicated Systems Aust Pty Ltd
Elma Electronic has released a range of front panels that are also heat sinks. The panels dissipate heat while covering open sections of an enclosure.
Watertight enclosures
17 June, 2009 | Supplied by: Hammond Electronics Pty Ltd
Hammond Electronics has extended the capabilities of the 1457 extruded aluminium family of small enclosures with the introduction of RFI screened IP54 environmentally sealed versions.
Modular safes
17 June, 2009 | Supplied by: Rittal Pty Ltd
Lampertz has launched two modular safes that provide high security for mid-sized organisations.
Bolt fall tester
01 June, 2009 | Supplied by: TechRentals
TechRentals has introduced the Hilti Tester 4 into its rental fleet.
Appliance terminals
01 June, 2009 | Supplied by: Avnet Electronics Marketing
The 6610 is claimed to be the first appliance outlet using IDC terminals. This allows reduction of labour costs by supporting more efficient assembly.
Shock racks
01 June, 2009 | Supplied by: Switches Plus Components Pty Ltd
SKB now produces a 4U version of its military/industrial shock racks in the 24, 28 and 30" deep models.
Instrument direct box
01 June, 2009 | Supplied by: Clarke & Severn Electronic Solutions
Switchcraft has launched an instrument direct box, the SC800.
Keyboard drawers
01 June, 2009 | Supplied by: Interworld Electronics and Computer Industries
Interworld Electronics has released a range of ruggedised rackmount keyboard drawers from iKey.
Safety conduit
01 June, 2009 | Supplied by: Albatech Pty Ltd
Environmental and safety conduit made from recycled polymer has been introduced by Albatech.
IP65 sealed enclosure
11 May, 2009 | Supplied by: http://www.hammondmfg.com/1457.htm
Hammond's 1457 range extends the capabilities of the 1455 extruded aluminium family of small enclosures with the addition of IP65 sealed die-cast aluminium end panels, enabling the enclosure to be used in dusty and wet environments.
Instrument enclosures
27 April, 2009 | Supplied by: ERNTEC Pty Ltd
The 400 series of moulded miniature enclosures is suitable for instrumentation and telecommunications equipment from handheld to desktop sizes.
Rubber grommets
27 April, 2009 | Supplied by: NPA Pty Ltd
Heyco Products has released a range of rubber grommets for mounting or through-hole wire applications.
SMD connectors
27 April, 2009 | Supplied by: Active Components (NZ) Ltd
While resistors and capacitors have been soldered directly onto a PCB with surface-mount technology since the ’80s, the wired units, such as terminals and plug connectors, are still led through holes and soldered on the underside of the board.
