Components

Wavelex WAT06E 30 dB attenuator

09 January, 2014 | Supplied by: Wireless Components

The WAT06E precision attenuator from Wavelex operates from DC to 6 GHz, with 50 Ω impedance and up to 30 dB attenuation, and features 20 W continuous wave (CW) RF power handling and 1.2:1 VSWR. It is suited for wideband power attenuation, high power measurement, high power IP measurement and RF bench test applications.


Texas Instruments SimpleLink Wi-Fi CC3000 processor

09 January, 2014 | Supplied by: RS

RS Components is stocking the SimpleLink WiFi CC3000 product family from Texas Instruments (TI). The TI CC3000 module is a self-contained 802.11 wireless network processor that simplifies and accelerates the implementation of internet connectivity. The SimpleLink Wi-Fi solution minimises the software requirements of the host microcontroller (MCU) and is thus suitable for embedded applications using any low-cost and low-power MCU with a compact memory footprint.


Intel outlines plans for wearables, security market

08 January, 2014 | Supplied by: Intel Australia Pty Ltd

Intel Corporation CEO Brian Krzanich has announced a range of initiatives to accelerate wearable device innovation. Krzanich made the announcements during the pre-show keynote for the 2014 International Consumer Electronics Show. He also demonstrated Intel-developed designs for wearable devices at the show.


Anaren Xinger III femto-sized 3 dB hybrid coupler

08 January, 2014 | Supplied by: Wireless Components

The low-profile, high-performance X3C25F1-03S, the latest femto-sized coupler in the Xinger III range of products from Anaren, has been miniaturised to a 3 x 5 mm footprint without sacrificing electrical performance.


Low-power tunnelling transistor for high-performance devices

20 December, 2013

Researchers from Pennsylvania State University (Penn State), the National Institute of Standards and Technology (NIST) and wafer company IQE have written a paper on recent developments in compound semiconductor device technologies for high-speed and low-voltage/low-power applications.


Arduino Yún wireless board

16 December, 2013 | Supplied by: RS

The Arduino Yún is the first of a range of wireless products that integrate the open-source Arduino architecture with Linux. The product combines the Arduino Leonardo, based on Atmel's ATmega32u4 8-bit microcontroller, with an embedded Atheros AR9331 Wi-Fi system-on-chip (SoC) running Linino, a MIPS GNU/Linux variant of OpenWRT.


Intel Atom 22 nm multicore SoC processors

12 December, 2013 | Supplied by: Mouser Electronics (Hong Kong) Ltd

The Intel Atom 22 nm 64-bit multicore processors feature USB 3.0 and graphics support, targeting high-performance, low-power applications ranging from smartphones to intelligent embedded systems. The SoC processors are manufactured using Intel's Tri-Gate CMOS technology. They are claimed to bring improved performance and energy efficiency compared to competing processors using planar transistor technology.


Weidmuller power solid-state relays

03 December, 2013 | Supplied by: Weidmuller Pty Ltd

Electrical connectivity supplier Weidmuller has released its latest range of power solid-state relays (PSSRs). The electronic PSSRs deliver an unrestricted service life because they are wear-free.


Moxa PowerTrans PT-7528 series ethernet switches with MMS data modelling

27 November, 2013 | Supplied by: Moxa Systems Co Ltd

Moxa has announced the PowerTrans PT-7528 series - ethernet switches designed to fulfil IEC 61850-90-4 requirements and equipped with built-in MMS servers. The series is suitable for power substation automation applications in extremely harsh environments.


Breaking symmetry for faster computers

27 November, 2013

Tokyo Tech has developed a compound that shows highly unusual conducting properties that could be used in future electronic components. Ordinary insulating solids, such as diamond, have energy bands that are fully occupied by electrons.


VLAB RH850 MCU Virtual Platform Toolbox

27 November, 2013 | Supplied by: ASTC Design

VLAB virtual platform support for Renesas microcontrollers (MCUs) now extends to the RH850 family for automotive applications. The product comprises the VLAB virtual prototyping system, an RH850 MCU Virtual Platform Toolbox with RH850 virtual prototypes and a wide selection of tools and toolboxes for software and system development, debug and analysis.


Peregrine PE42520 and PE42521 SPDT RF switches

27 November, 2013 | Supplied by: Wireless Components

Peregrine Semiconductor Corporation has released two RF single-pole, double-throw (SPDT) switches. The PE42520 and PE42521 are pin-compatible upgraded versions of the PE42552, with higher power handling, fast settling and switching time, and high isolation.


Anaren D30NA30Z4, D50AA20Z4 and D50AA30Z4A SMT high-power attenuators

26 November, 2013 | Supplied by: Wireless Components

Anaren has released three surface-mount technology (SMT) high-power attenuators. The 30-50 W devices are high-performance, high-power chip attenuators covering from DC to 3.0 GHz and featuring high return loss and small footprints.


STMicroelectronics SD4933MR moisture-resistant DMOS transistor

26 November, 2013 | Supplied by: Wireless Components

The STMicroelectronics SD4933MR is an N-channel field-effect RF power transistor intended for use in 50 V industrial, scientific and medical (ISM) applications up to 100 MHz. The diffused metal oxide semiconductor (DMOS) transistor benefits from environmentally designed packaging.


element14 Gertduino expansion board for Raspberry Pi

26 November, 2013 | Supplied by: http://www.element14.com/community/docs/DOC-64326

element14 has announced the availability of the Gertduino expansion board for the Raspberry Pi computer. The board is Arduino compatible and plugs directly onto the Raspberry Pi. It features dual Atmel Atmega MCUs -328 and -48, both of which can be programmed from the Raspberry Pi using the Arduino GUI or the GCC Atmel compiler.


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd