Data acquisition & management

Tiny camera lens may help link quantum computers

25 September, 2018

The lens is made of a silicon film with millions of nanostructures forming a metasurface that can control light with functionalities outperforming traditional systems.


Trio Flex slice EtherCAT device

31 August, 2018 | Supplied by: Motion Technologies Pty Ltd

The Trio Flex slice series of add-ons allow simple extension of an existing or new EtherCAT network.


Crystal Group PASS cybersecurity technology

21 August, 2018 | Supplied by: Metromatics Pty Ltd

Crystal Group PASS (Platform Agnostic Security Solutions) cybersecurity technology is designed for a wide range of computationally intense, network-complex and expanded data storage applications operating in severe environments.


Thorlabs CS505 series 5 MP compact CMOS cameras

25 July, 2018 | Supplied by: SDR Scientific

The CS505 series 5 MP CMOS cameras are available with either a monochrome or colour sensor and can generate full-frame 5 MP readout at 35 fps with 12-bit resolution.


Thorlabs Ganymede GAN610C1 and GAN620C1 OCT systems

20 July, 2018 | Supplied by: SDR Scientific

The GAN610C1 and GAN620C1 Spectral-Domain OCT systems are designed to offer high-speed, high-sensitivity 2D and 3D imaging of moving samples with reduced motion artefacts.


From preventive to predictive maintenance

12 July, 2018 | Supplied by: STMicroelectronics Pty Ltd

Every machine with moving parts suffers some wear and tear and will inevitably need to be serviced or have some parts replaced. The question is, when is the best time to do this?


HW Technologies Smart Klaus Industry 4.0 workplace

10 July, 2018 | Supplied by: HW Technologies

The Smart Klaus Industry 4.0 workplace takes advantage of data by reflecting it to workers in a lean process. It is based around a four-step principle — guidance, verify, confirm, document — that divides even complex work processes into clear and structured sub-processes.


Emona Instruments 3D printed electronics

06 July, 2018 | Supplied by: Emona Instruments Pty Ltd

Emona Instruments is bringing high-technology 3D printing solutions to Australian industry for electronics R&D, manufacturing, research and education with the printing of multilayer PCBs, as well as resistors, capacitors, antennas, sensors and thin film transistors.


Nanocrystals light up the path to next-gen data storage

04 July, 2018

Nanosized crystals of salt encoded with data using light from a laser could be the next data storage technology of choice.


Vision Engineering Evo Cam II Full-HD digital inspection microscope

04 July, 2018 | Supplied by: Re-Surface Technologies

Suitable for inspecting electronics, the Evo Cam II digital inspection microscope makes image capture and documentation simple and fast.


FLIR ETS320 thermal imager

02 July, 2018 | Supplied by: TRIO Test & Measurement

The FLIR ETS320 thermal imager helps engineers and test technicians collect data in seconds and analyse it quickly.


NI FlexLogger data-logging software

28 May, 2018 | Supplied by: National Instruments Aust Pty Ltd

NI has announced FlexLogger configuration-based data-logging software for validation testing. With intuitive workflows and integrated data management, the software helps automotive test departments quickly capture well-documented data to verify system functionality in real-world conditions and comply with strict government regulations.


Artila Aport-214PG C-programmable device server

18 May, 2018 | Supplied by: Micromax Pty Ltd

Artila Electronics' Aport-214PG FreeRTOS programmable device server is powered by a 32-bit Atmel SAM4E16E 120 MHz Arm Cortex-M4 processor which is equipped with 256 KB SRAM, 3 MB Flash and a FreeRTOS real-time operating system.


Keysight Technologies Test Asset Optimization Services

03 May, 2018 | Supplied by: Keysight Technologies Australia Pty Ltd

Keysight Technologies' Test Asset Optimization Services offer an integrated approach that is claimed to improve return on test investment and decrease capital and operating expenses for equipment used in R&D and manufacturing.


Researchers 3D print electronics directly on skin

30 April, 2018

Researchers have used a customised, low-cost 3D printer to print electronics on a real hand for the first time.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd