Advantech MicroTCA Starter Kit
24 May, 2010 | Advantech Australia Pty Ltd
The MicroTCA Starter Kit, a module management controller (MMC) design pack extension, is claimed to facilitate fast and efficient AMC design. By integrating the MMC design pack developed by GateWare, Advantech has created an easy-to-use, self-contained platform for development of applications based on uTCA and AMC open standards.
Phoenix Contact mini plug connectors
21 May, 2010 | Rittal Pty Ltd
Phoenix Contact has added two mini plug connectors with fast connection to its range. The PTPM pierce contact connector simplifies the connection of flexible individual conductors up to AWG 22.
M Rutty GR 23 brush-type DC motor
21 May, 2010 | M Rutty & Co Pty Ltd
M Rutty has introduced the GR 23 brush-type DC motor. The continuous output torque has been increased, from 0.5 to 1 Ncm, as well as an increase in length by 15% over the earlier GR22.
Advantech MIC-3666 network mezzanine card
21 May, 2010 | Advantech Australia Pty Ltd
Advantech has introduced a network mezzanine card compliant with the VITA XMC standard, the MIC-3666, enabling 10 gigabit ethernet on a CompactPCI form factor.
Satcam QCJ5 machine
21 May, 2010 | Satcam & RTD Circuit Design
The QCJ5 machine, with its third access motion control, can repair circuit boards, de-panel or create panels and housings.
Advantech Trek-550 industrial in-vehicle dedicated box computer
21 May, 2010 | Advantech Australia Pty Ltd
Advantech has announced Trek-550, an industrial in-vehicle dedicated box computer which when placed in trucks, buses, vehicle fleets and taxis, can be connected to a variety of monitoring systems such as onboard diagnostics, a car area network and tyre pressure monitoring systems.
Advantech SOM-7562 COM-Ultra CPU module
21 May, 2010 | Advantech Australia Pty Ltd
Advantech has released its latest COM CPU module powered by the Atom processor.
Advantech FWA-6500 dual processor
21 May, 2010 | Advantech Australia Pty Ltd
The FWA-6500 dual processor appliance is based on the Xeon Processor 5600 series.
MtronPTI LCC clock oscillators
19 May, 2010 | Ampec Technologies Pty Ltd
MtronPTI has released clock oscillators for down-hole drilling and other harsh environment applications.
PMM 9010/9030 EMI test receiver
19 May, 2010 | Consultant Technology Australia Pty Ltd
The EMI emission testing limits for EMC compliance are altering from 1 to 3 GHZ.
Fluke TiR32 thermal image camera
19 May, 2010 | TechRentals
The Fluke TiR32 can scan large areas quickly to detect problems or the extent of any damage. The handheld instrument delivers clear, crisp images needed to find problems fast with its 320 x 240 sensor.
Anritsu MS2711D-31-25 spectrum master
19 May, 2010 | TechRentals
The Anritsu spectrum master MS2711D-31-25 is a rugged, ultra-lightweight, battery-operated instrument that allows users to conduct measurements for field environments and other mobile applications.
Fluke Linkrunner Pro
19 May, 2010 | TechRentals
Troubleshooting or just maintaining a network can be time consuming and costly. Fluke Linkrunner Pro combined with Fluke Etherscope is an easy and non-expensive way to not only troubleshoot front-line IT problems and in-depth LAN analysis but also determine the quality of a LAN with RFC2544 tests which include latency, loss and BERT throughput.
Xantrex XKW programmable DC power supply
19 May, 2010 | TechRentals
The Xantrex XKW 3 kW programmable DC power supply is a compact device that provides power for OEM applications where high power and a wide adjustment of output voltage or current are required.
Em Test ESD 30N tester
19 May, 2010 | Consultant Technology Australia Pty Ltd
The Em Test model ESD 30N is an ESD tester for simulating ESD pulses to 30 kV with discharges up to 20 Hz in both air and contact discharge modes.
