A history of industrial robots
01 September, 2018 by Alex Misiti for Mouser Electronics | Supplied by: Mouser Electronics (Hong Kong) LtdDriven by advances in software, sensors and electronics, the market for industrial robots has greatly evolved over the past half century.
Keystone Electronics lithium coin cell battery holders
21 August, 2018 | Supplied by: NPA Pty LtdKeystone Electronics' lithium coin cell battery holders, in thru-hole mount (THM) and surface mount (SMT) varieties, are available for 12, 16, 20, 23, 24 and 30 mm-diameter cells.
Edge plating on PCBs: a short guide
20 August, 2018 | Supplied by: PCB Global Pty LtdEdge plating requires precision handling of printed circuit boards, while fabricators face several challenges — chiefly around preparing the edges for plating and creating a lifetime adhesion for the plated material.
EXAIR 303SS stainless steel air jets
16 August, 2018 | Supplied by: Compressed Air Australia Pty LtdEXAIR's 303SS air jets provide efficient blowoff and cleaning within corrosive, high-temperature or washdown environments.
EXAIR 1/8 NPT Small External Mix Spray Nozzles
15 August, 2018 | Supplied by: Compressed Air Australia Pty LtdEXAIR's 1/8 NPT Small External Mix Spray Nozzles atomise fluids at up to 94.6 L/h. The nozzles are suitable where a high volume of liquid is needed and can be used on liquids with a viscosity up to 800 cP.
ROLEC technoPLUS enclosures with IP69K protection
01 August, 2018 | Supplied by: ROLEC OKW Australia New Zealand P/LROLEC's technoPLUS pole-mounted enclosures are now available with optional IP69K protection, safeguarding electronics from high-pressure and high-temperature jet washing.
Hammond Electronics RM family rack-mounting and desktop enclosures
01 August, 2018 | Supplied by: Hammond Electronics Pty LtdHammond Electronics has added 4U heights and 559 mm depths to all sizes of its RM family of 19″ and half-width rack-mounting and desktop enclosures.
Nordson SELECT selective soldering systems
13 July, 2018 | Supplied by: Oritech Pty LtdThe Nordson SELECT range of selective soldering systems caters for different requirements from low to high volume.
Ersa i-CON 1V and i-CON 2V soldering and desoldering stations
13 July, 2018 | Supplied by: Machinery Forum Pty LtdTogether, Ersa's i-CON 1V and 2V control units are able to drive eight different soldering tools.
INVENTEC ECOREL FREE 305-16LVD solder paste
12 July, 2018 | Supplied by: Onboard SolutionsECOREL FREE 305-16LVD is a no-clean, lead-free solder paste developed with the chemistry of the ECOREL solder paste range. The product is suitable for standard convection reflow and vapour phase soldering.
Interflux Electronics LMPA-Q low melting point alloys
12 July, 2018 | Supplied by: Oritech Pty LtdInterflux Electronics' LMPA-Q range of low melting point alloys (LMPAs) is designed to allow users to use soldering temperatures that are lower than for traditional lead-free Sn(Ag)Cu (SAC) alloys.
Altronic Distributors T 2460A lead-free touchscreen soldering station
05 July, 2018 | Supplied by: Altronic Distributors Pty LtdAltronic Distributors has introduced the T 2460A high-power, temperature-controlled soldering station with touch screen. The soldering station incorporates a special intelligent microchip control design.
DFA VP-Jumbo condensation reflow soldering machine
05 July, 2018 | Supplied by: Hawker RichardsonThe DFA VP-Jumbo soldering solution has been specifically designed for reflow soldering in laboratory and prototype environments.
Precision Electronic Technologies electronics manufacturing services
04 July, 2018 | Supplied by: Precision Electronic TechnologiesPrecision Electronic Technologies is a specialist electronic solutions organisation. The Australian-owned company provides an extensive range of manufacturing services, including printed circuit boards and assemblies, cables, wiring harnesses, stencils, plastic and metal enclosures, decals, membranes and full turnkey solutions.
LPMS Alpha 100J – EMTT03 low-pressure overmoulding machine
03 July, 2018 | Supplied by: Tarapath Pty LtdSuitable for low- to medium-volume, high-mix manufacturing, the Alpha 100J – EMTT03 is a versatile low-pressure overmoulding solution. The 3 L tank coupled with the handheld dispensing head enables the user to encapsulate multiple products concurrently, enabling efficient workflow.
